Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Active Protection

Concept

Active Protection prepares occupants and the vehicle for a possible accident in critical driving or collision situations.

General information

Active Protection consists of various PreCrash functions, which can vary depending on the equipment.

The system is used to detect certain critical driving situations that might lead to an accident. This includes the following critical driving situations:

Certain functions of several systems can, within the system limits, lead to Active Protection triggering:

Safety information

Warning


The system cannot serve as a substitute for the driver's personal judgment. Due to the system limits, critical situation could not be detected reliably or in time. There is a risk of accident.

Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.

Function

When the safety belt is fastened, the driver's and passenger's belt straps are automatically tightened once after driving away.

In accident-critical situations, the following individual functions become active as needed:

After a critical driving situation without an accident, the front safety belts are loosened again.

If the belt tension does not loosen automatically, stop the vehicle and unbuckle the safety belt using the red button in the buckle. Fasten the safety belt before continuing on your trip.

All other systems can be restored to the desired setting.

BMW Drive Recorder
Concept The system stores brief video recordings of the surrounding area of the vehicle, e.g., to document traffic events. Additionally, the following parameters are stored for the trip: Date. Time ...

PostCrash - iBrake
Concept In the event of an accident, the system can bring the vehicle to a halt automatically without intervention by the driver in certain situations. This can reduce the risk of a further collision ...

Other materials:

Abs and traction actuator (skid control ecu) communication stop mode
Description Wiring diagram Inspection procedure Notice: Turn the ignition switch off before measuring the resistances of the main wire and the branch wire. After the ignition switch is turned off, check that the key reminder warning system and light reminder warning system ...

Rear wiper motor
Components Removal Disconnect cable from negative battery terminal Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation. Remove back door center garnish (see page ed-59) ...

Diagnostic trouble code chart (2006/01- )
Hint: When the air conditioning system functions properly, dtc b1400/00 is output. Hint: *1: Dtc b1422/22 (compressor lock sensor circuit) is indicated only for a currently occurring malfunction for 2grfe. To confirm dtc b1422/22, perform the following steps: With the ignition swit ...

В© 2011-2022 Copyright www.trav4.net