Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Active seat ventilation

Concept

Integrated fans in the seat and armrest areas provide a comfortable seat temperature.

Overview

Front

Front


Active seat ventilation


Rear

Rear


Active seat ventilation


Switching on

Press the button once for each
ventilation level.

The maximum temperature is reached when three LEDs are lit.

The ventilation switches back by one level after a short time.

Switching off

Press and hold the button until
the bar display on the climate control display goes out.

Climate control rules

Concept

A number of heating and cooling functions can be automatically activated depending on the external temperature.

General information

The external temperature at which the functions are to be automatically activated can be set via iDrive.

Activation is performed if the external temperature exceeds or falls below the set temperature in the first few minutes after drive-ready state has been switched on. A new alignment is carried out after the settings have been changed.

Depending on the equipment package, the following functions can be automatically activated:

If the trip is continued within approx. 15 minutes after a stop, the functions are activated automatically with the levels that were last selected.

Functional requirement

Activating/deactivating

Via iDrive:

  1. "CAR"
  2. "Settings"
  3. "Climate control"
  4. "Climate control rules"
  5. Select the desired functions.
  6. Activate the desired rule.
  7. Set the level.
Seat and armrest heating
Concept The system heats seats and armrests as needed. General information Seat heating can also be used without armrest heating. Deactivate the armrest heating as needed. Overview Front Seat and a ...

Transporting children safely
...

Other materials:

BMW Gesture Control
Concept Several iDrive functions can be operated by hand motion using BMW Gesture Control. Overview The camera in the roofliner detects gestures that are carried out in the area of the center console at the height of the Control Display. Activating/deactivating Via iDrive: "CAR" "Settings" &nb ...

Evaporative emission leak detection pump
Dtc summary Hint: The leak detection pump is built into the canister pump module. Description The description can be found in the evap (evaporative emission) system (see page es-335). Inspection procedure Refer to the evap system (see page es-340). Monitor description 5 Hours* afte ...

Defogging the windshield
Set the air outlet selector dial to position. Set the outside/recirculated air mode button to outside air mode if recirculated air mode is used. Perform the following operations accordingly: To adjust the fan speed, turn the fan speed control dial. To adjust the temperat ...

В© 2011-2022 Copyright www.trav4.net