Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Apple CarPlay preparation

Concept

CarPlay allows certain functions of a compatible Apple iPhone to be used via Siri voice operation and iDrive.

Functional requirements

Switching on Bluetooth and CarPlay

Via iDrive:

  1. "COM"
  2. "Mobile devices"
  3.  Move the Controller to the right.
  4.  "Settings"
  5. Select the following setting: "Apple CarPlay"
  6. Activate the function.

Pairing the iPhone with CarPlay

Via iDrive:

  1. "COM"
  2. "Mobile devices"
  3. Move the Controller to the right.
  4. "New device"
  5. "Phone calls and audio" The vehicle's Bluetooth name is displayed on the Control Display.
  6. On the mobile device, search for Bluetooth devices in the vicinity and select the vehicle.

    A control number is displayed.

  7. Compare the control number displayed on the Control Display with the control number on the display of the mobile device, and confirm that the two match.
  8. Select CarPlay: "Confirm note and connect to Apple CarPlay"

The iPhone is connected to the vehicle and displayed in the device list.

Operation

For more information, refer to the Integrated Owner's Manual or the Owner's Manual for Navigation, Entertainment, Communication.

Frequently Asked Questions

All requirements are met and all required steps were completed in the specified order. Despite that, the mobile device does not function as expected.

In this case, the following explanations can help: The iPhone has already been paired with Apple CarPlay. When a new connection is established, CarPlay can no longer be selected.

If the steps listed have been carried out and the required function is still not available: contact the hotline, a dealer's service center or another qualified service center or repair shop.

USB connection
General information The following mobile devices can be connected to the USB port: Mobile phones. Audio devices such as MP3 players. USB storage devices. Common file systems are supported. FAT32 ...

Screen Mirroring
General information Screen Mirroring enables mirroring (outputting) of the smartphone display on the Control Display. Functional requirements Compatible smartphone with Screen Mirroring interface. ...

Other materials:

Reassembly (2006/01- )
Install front drive shaft bearing (for rh) Install the bearing bracket snap ring to the inboard shaft. Using sst and a press, press in the drive shaft bearing to the inboard joint rh. Sst 09527-10011, 09710-04081 Notice: The bearing should be installed completely. Usi ...

Air-fuel ratio (a/f) and heated oxygen (ho2) sensor monitors (active air-fuel ratio control type)
Preconditions The monitor will not run unless: 2 Minutes or more have elapsed since the engine was started. The engine coolant temperature (ect) is 75°c (167°f) or more. Cumulative driving time at a vehicle speed of 48 km/h (30 mph) or more exceeds 6 minutes. Air-fuel rat ...

Crankshaft position sensor "A"
Description The crankshaft position (ckp) sensor system consists of a ckp sensor plate and a pickup coil. The sensor plate has 34 teeth and is installed on the crankshaft. The pickup coil is made of wound copper wire, an iron core and magnet. The sensor plate rotates and, as each tooth ...

© 2011-2022 Copyright www.trav4.net