Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: BMW Drive Recorder

Concept

The system stores brief video recordings of the surrounding area of the vehicle, e.g., to document traffic events.

Additionally, the following parameters are stored for the trip:

General information

There are various ways for storing video recordings:

The system records up to 20 seconds before and after the activation of the storage.

Cameras of the assistance systems are used, for instance Panorama View.

Data protection

The permissibility of recording and using video recordings is contingent upon the statutory regulations of the country in which the system is to be used. The user is responsible for the use of the system and compliance with the respective regulations.

The manufacturer of the vehicle recommends confirming there are no statutory or regulatory constraints on use of the system in your state or country prior to the initial use. In addition, the laws with respect to use of the system should be verified in regular intervals, especially when borders are frequently crossed.

Other drivers of the vehicle must be informed about the system. In addition, information about the system is required when handing off the vehicle.

Functional requirements

Activating/deactivating

The BMW Drive Recorder must be activated before the first use of the recording function.

Via iDrive:

  1. "Apps"
  2. "Drive Recorder"
  3. "Settings"
  4.  "Recording allowed"
  5. Select the desired setting.

Recording functions

Automatic recording

The recording is stored automatically when the vehicle sensors detect an accident occurrence.

Manual recording

Using the button:

Press and hold this button.


Via iDrive:

  1. "Apps"
  2. "Drive Recorder"
  3. "Start recording"

To stop the recording: "Cancel".

Recording can also be started by selecting the widget on the Control Display.

Recording playback and administration

Stored video recordings can be played back, exported and deleted.

For your own safety, the video recording is only displayed on the Control Display up to approx.

2 mph/3 km/h. In some national-market versions, the recording is only displayed if the parking brake is engaged or if the selector lever is in selector lever position P.

Via iDrive:

  1. "Apps"
  2. "Drive Recorder"
  3. "Saved recordings"
  4. Select desired recording.
  5. Select the desired setting:

If a camera change occurred during the recording, different segments of the video can be selected.

Adjusting

General information

Different settings can be made.

Recording type

Via iDrive:

  1. "Apps"
  2.  "Drive Recorder"
  3. "Settings"
  4.  "RECORDING TYPE"
  5. Select the desired setting:

Recording time

Via iDrive:

  1. "Apps"
  2. "Drive Recorder"
  3. "Settings"
  4. Select the desired setting:

Cameras

Via iDrive:

  1. "Apps"
  2. "Drive Recorder"
  3. "Settings"
  4. "Camera selection"
  5. Select desired camera.

In case of an accident, the system switches automatically to "All" cameras.

If driver assistance systems are active, their camera views are selected automatically.

System limits

In the event of serious accidents, it may not be possible to store recordings if the damage on the vehicle is too great or the power supply was interrupted.

If equipped with Equipment Stop Assistant
Concept If the driver is no longer fit to drive, the system helps to safely bring the vehicle to a standstill. General information The emergency stop function is not triggered automatically. The emerg ...

Active Protection
Concept Active Protection prepares occupants and the vehicle for a possible accident in critical driving or collision situations. General information Active Protection consists of various PreCrash fun ...

Other materials:

Purpose of readiness tests
The on-board diagnostic (obd ii) system is designed to monitor the performance of emission related components, and indicate any detected abnormalities with dtc (diagnostic trouble codes). Since various components need to be monitored during different driving conditions, the obd ii syste ...

Camshaft position "A"
Dtc P0011 Camshaft position "a" - timing over-advanced or system performance (bank 1) Dtc  P0012 Camshaft position "a" - timing over-retarded (bank 1) Description The vvt system includes the ecm, oil control valve (ocv) and vvt controller. The ecm sends a target du ...

Driver profiles- Renaming a driver profile
Countries in which ConnectedDrive is not available: The name that was assigned when the driver profile was set up can be changed via iDrive: "CAR" "Driver profiles" As an alternative for Steps 1 and 2, the profile image can be tapped in the top status bar.  Select driver profile. "Set ...

В© 2011-2022 Copyright www.trav4.net