Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: BMW Touch Command


BMW Touch Command is a tablet that can be used to operate important vehicle functions.

General information

Depending on the equipment version, BMW Touch Command is located in the rear console or in the center armrest in the rear.

The following functions can be used:



  1. BMW Touch Command
  2. Switching on/off
  3. Ejecting


Buttons on BMW Touch Command

Button /Function

- Display the main menu.

- Back.

Connecting BMW Touch Command

Switch on BMW Touch Command.

The connection is established automatically.

If the connection is not established automatically, scan the QR code on the Control Display with the BMW Touch Command.

Display QR code via iDrive manually:

  1. "COM"
  2. "Mobile devices"
  3.  Move the Controller to the right.
  4. "New device"
  5. "Internet, apps", "via Wi-Fi"

Charging the rechargeable battery

BMW Touch Command can be charged in the rear center armrest.

Insert BMW Touch Command into the tray with the screen facing upward. To charge the rechargeable battery, insert BMW Touch Command with the charging socket to the left.

Selecting menu items

  1. Tap on the symbol.

    The main menu is displayed.

  2. Select the desired menu item.
  3. Select the desired setting.



Settings, such as brightness, can be entered.

  1. Tap on the symbol.

  2.   Tap the symbol in
    the status field.
  3. "Brightness"
  4. Slide the bar to the right or left until the desired setting is displayed.

Device information

Information about the device can be displayed in the settings:

BMW Gesture Control
Concept Several iDrive functions can be operated by hand motion using BMW Gesture Control. Overview The camera in the roofliner detects gestures that are carried out in the area of the center consol ...

BMW Remote Software Upgrade

Other materials:

Diagnosis system
Description When troubleshooting on-board diagnostic (obd ii) vehicles, the vehicle must be connected to the obd ii scan tool (complying with sae j1987). Various data output from the vehicle's ecm can then be read. Obd ii regulations require that the vehicle's onboard computer ...

Open in stop light switch circuit
Description The skid control ecu detects the brake operating conditions through a signal transmitted by the stop light switch. The skid control ecu incorporates an open circuit detection circuit. This dtc is set under either of the following conditions: An open is detected in the stop lig ...

Handling of hose clamps
Before removing the hose, check the clamp position so that it can be reinstalled in the same position. Replace any deformed or dented clamps with new ones. When reusing a hose, attach the clamp on the clamp track portion of the hose. For a spring type clamp, you may want to spread ...

В© 2011-2022 Copyright