Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Child restraint systems with tether strap

Safety information

Warning


If the upper retaining strap is incorrectly used for the child restraint system, the protective effect can be reduced. There is a risk of injury.

Make sure that the upper retaining strap does not run over sharp edges and is not twisted as it passes the upper anchor.

Warning


If the rear backrest is not locked, the protective effect of the child restraint system is limited or there is none. In certain situations, for instance braking maneuvers or in case of an accident, the rear backrest can fold forward. There is a risk of injuries or danger to life. Make sure that the rear backrests are locked.

NOTICE


The anchors for the upper retaining straps of child restraint systems are only provided for these retaining straps. When other objects are mounted, the anchors can be damaged. There is a risk of damage to property. Only mount child restraint systems to the upper anchors.

Anchors

Symbol /Meaning

- The respective symbol shows
the anchor for the upper retaining strap. Seats with an upper top tether are marked with this symbol. It can be found on the rear seat backrest or the rear window shelf.

Routing the retaining strap

Routing the retaining strap


  1. Direction of travel
  2. Head restraint
  3. Hook for upper retaining strap
  4. Anchor
  5. Rear window shelf
  6. Seat backrest
  7. Upper retaining strap

Attaching the upper retaining strap to the anchor

  1. Open the anchor cover.
  2.  Raise the head restraint.
  3.  Guide the upper retaining strap between the supports or along both sides of the head restraint to the anchor.

    For the middle seat, guide it over or along both sides of the head restraint to the anchor where applicable.

  4. Attach the hook of the retaining strap to the anchor.
  5. Tighten the retaining strap by pulling it down.
  6. Lower and engage head restraints as needed.

Locking the doors and windows in the rear

General information

In certain situations it may be advisable to secure the rear doors and windows, for instance when transporting children.

Doors

Doors


Push the locking lever on the rear doors up.

The door can now be opened from the outside only.

Safety switch for the rear

Press the button on the driver's
door.

This locks various functions so that they cannot be operated from the rear.

Additional information: Safety switch

LATCH child restraint fixing system
General information LATCH: Lower Anchors and Tether for Children. Pay attention to the specifications and the operating and safety information from the child restraint system manufacturer when select ...

Driving
...

Other materials:

Disassembly
Remove park/neutral position switch assembly Remove the nut, washer and control shaft lever. Using a screwdriver, pry off the lock plate. Remove the nut and lock plate. Remove the 2 bolts and pull out the switch. Remove breather plug hose Remove oil coo ...

Screen Mirroring
General information Screen Mirroring enables mirroring (outputting) of the smartphone display on the Control Display. Functional requirements Compatible smartphone with Screen Mirroring interface. Compatible devices Screen Mirroring is switched on on the smartphone. WLAN is switched on in the ...

Dtc check / clear
Check dtc When using intelligent tester: Connect the intelligent tester (with can vim) to the dlc3. Turn the ignition switch on and press the intelligent tester main switch on. Read the dtcs by following the prompts on the intelligent tester. Hint: Refer to the intel ...

В© 2011-2022 Copyright www.trav4.net