Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Cross traffic warning- Warning

General information

The respective display is called up on the Control Display. A signal tone may sound and the light in the exterior mirror may flash.

Light in the exterior mirror

Light in the exterior mirror


The light in the exterior mirror flashes if vehicles are detected by the rear sensors and your own vehicle is moving backwards.

Display in the PDC Park Distance Control view

Display in the PDC Park Distance Control view


In the PDC Park Distance Control view, the respective boundary area flashes red, if vehicles are detected by the sensors.

Display in the camera view

Display in the camera view


The respective boundary area, arrow 1, in the camera view flashes red, if vehicles are detected by the sensors.

Yellow lines, arrow 2, mark the bumper of your own vehicle.

Acoustic warning

In addition to the optical indicator, a warning signal sounds if your own vehicle moves into the respective direction.

System limits

The system may not be fully functional in the following situations:

Cross traffic warning
Concept At blind driveways or when driving out of diagonal parking spaces, approaching cross traffic is detected sooner by the system than is possible from the driver's seat. General information Two ...

Driving comfort
...

Other materials:

Adjusting the mirrors
Make sure that you can see backward clearly by adjusting the inside and outside rear view mirrors properly. Caution Observe the following precautions. Failure to do so may result in death or serious injury. Do not adjust the position of the driver’s seat while driving. Doing so could ...

Sitting safely
Vehicle features and options This chapter describes all standard, country-specific and optional features offered with the series. It also describes features and functions that are not necessarily available in your vehicle, e.g., due to the selected options or country versions. This also applies to ...

Throttle / pedal position sensor / switch "A" circuit range / performance problem
Hint: This dtc relates to the throttle position (tp) sensor. Description Refer to dtc p0120 (see page es-114). Monitor description The ecm uses the tp sensor to monitor the throttle valve opening angle. This sensor transmits two signals: vta1 and vta2. Vta1 is used to detect the th ...

© 2011-2022 Copyright www.trav4.net