Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Driver profiles

Concept

Driver profiles can be created to store personal vehicle settings. If the vehicle is used by multiple drivers, each driver can create his personal driver profile. When a driver profile is selected, the vehicle will automatically apply the stored settings in the driver profile.

General information

Three personal driver profiles can be created.

In addition, a guest profile is available that can be selected by any driver. The guest profile is active when a personal driver profile has not been selected.

Changes to the vehicle settings are automatically stored in the active driver profile or in the guest profile.

The recognition via a vehicle key can be assigned to a driver profile so that the vehicle will apply the settings as soon as the driver unlocks the vehicle. As soon as the vehicle recognizes the vehicle key, the corresponding driver profile will be activated.

ConnectedDrive countries: The settings stored in the driver's profile can be synchronized with the personal BMW ConnectedDrive account. It is thereby possible to use these settings in other BMW vehicles as well.

Functional requirements

When switching the driver profile, the vehicle must move at a maximum of walking speed.

Welcome screen

After the Control Display is switched on, the Welcome screen will be displayed.

The following actions can be carried out on the Welcome screen:

This option is offered in new vehicle for a limited period of time.

As soon as the engine is started or any button is pressed, the Welcome screen will be hidden.

Setup assistant

The setup assistant is offered in new vehicles for a limited period of time on the Welcome screen to configure the most important settings for the vehicle.

"Getting started" Select to start the set-up assistant.

The set-up assistant can be started via iDrive at any time.

  1. "CAR"
  2.  "Settings"
  3. "General settings"
  4. "Getting started"

The driver is guided step by step through the following functions:

The selected settings are stored in the active driver's profile.

Data protection
Vehicle features and options This chapter describes all standard, country-specific and optional features offered with the series. It also describes features and functions that are not necessarily ava ...

Driver profiles- Guest profile
The guest profile can be activated by any driver. Vehicle settings that are entered when the guest profile is active will be stored in the guest profile. In the following cases the guest profile is a ...

Other materials:

Operating instructions
Turning the end of the lever turns on the lights as follows: Type a The side marker, parking, tail, license plate, daytime running lights and instrument panel lights turn on. The headlights and all lights listed above (except daytime running lights) turn on. The headlights an ...

Terminals of ecu (2005/11-2006/01)
Check air conditioning amplifier Measure the voltage and resistance of the connectors. Hint: Check from the rear of the connector while it is connected to the air conditioning amplifier. Using an oscilloscope, check waveform 1. Compressor and pulley operation signa ...

Only rear door lh lock / unlock functions do not operate
Description The main body ecu receives lock / unlock switch signals and activates the door lock motor accordingly. Wiring diagram Inspection procedure Inspect rear door with motor lock assembly lh Apply the battery voltage to the door lock motor and check the operation of th ...

В© 2011-2022 Copyright www.trav4.net