BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Evasion Assistant- Warning with evasion support

Display in the instrument cluster

A warning symbol appears in the instrument cluster and in the Head-up Display if a collision with a detected vehicle is imminent.

Symbol /Measure

Symbol lights up red: prewarning.

Brake and increase distance.

Symbol flashes red and an
acoustic signal sounds: acute warning for obstacles.

Brake and make an evasive maneuver, if necessary.

Symbol flashes red and an
acoustic signal sounds: acute warning for pedestrians.

Brake and make an evasive maneuver, if necessary.

Acute warning with evasion support

An acute warning is displayed when there is an imminent danger of collision due to the vehicle approaching another object at a high speed.

Intervene in the case of an acute warning. The system is designed to provide assistance by taking evasive action when there is a risk of collision.

Acute warnings may be provided even when there has been no prior warning.

System limits

Safety information

Warning

The system is designed to operate in certain conditions and circumstances. Due to conditions or other factors, the system may not respond.

There may be a risk of accident or risk of damage to property. Actively intervene as warranted. Refer to the information in this Owner's Manual regarding the scope of the system's operation and limitations.

Detection range

The system's detection potential is limited.

Only objects that are detected by the system are taken into account.

Thus, a system reaction might not come or might come late.

The following situations may not be detected, for example:

• Slow moving vehicles when you approach them at high speed.
• Vehicles that suddenly swerve in front of you, or sharply decelerating vehicles.
• Vehicles with an unusual rear appearance.
• Two-wheeled vehicles ahead of you.

Functional limitations

The system may not be fully functional in the following situations:

• In heavy fog, wet conditions, or snowfall.
• In tight curves.
• If the driving stability control systems are limited or deactivated, for instance DSC OFF.
• If the field of view of the camera or the windshield is dirty or covered in the area of the interior mirror.
• If the camera has overheated and been temporarily switched off due to excessively high temperatures.
• Up to 10 seconds after the start of the engine via the Start/Stop button.
• During calibration of the camera immediately after vehicle delivery.
• If there are constant blinding effects because of oncoming light, for instance from the sun low in the sky.
• When it is dark outside.
• Depending on the equipment: if the radar sensors are dirty or covered.
• Depending on the equipment version: after improperly performed work on the vehicle paint in the area of the radar sensors.

Attaching any objects such as stickers or film in the beam area of the radar sensors will also limit the function of the radar sensors and may even cause them to fail.