Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Front collision mitigation- System limits

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals / Controls / Safety / Front collision mitigation- System limits

Safety information

Warning


The system is designed to operate in certain conditions and circumstances. Due to conditions or other factors, the system may not respond.

There may be a risk of accident or risk of damage to property. Actively intervene as warranted. Refer to the information in this Owner's Manual regarding the scope of the system's operation and limitations.

Detection range

Detection range


The system's detection potential is limited.

Only objects that are detected by the system are taken into account.

Thus, a system reaction might not come or might come late.

The following situations may not be detected, for instance:

Upper speed limit

If the vehicle speed exceeds approx.

155 mph/250 km/h, the system is deactivated temporarily. When the vehicle slows down to below this speed, the system is reactivated.

Functional limitations

The system may not be fully functional in the following situations:

Attaching any objects such as stickers or film in the beam area of the radar sensors will also limit the function of the radar sensors and may even cause them to fail.

Warning sensitivity

The more sensitive the warning settings are, for example the warning time, the more warnings are displayed. Therefore, there may also be an excess of premature or unjustified warnings and reactions.

Front collision mitigation- Switching on/off
Switching on automatically The system is automatically active after every driving off. Switching on manually Press the button. The menu for the Intelligent Safety system is displayed. If all Intell ...

Evasion Assistant
Concept The system supports the driver in making evasive maneuvers in certain situations, such as when obstacles or persons suddenly appear. General information The system issues a warning and interve ...

Other materials:

Steering angle sensor zero point malfunction
Description The skid control ecu learns the steering sensor zero point every time the ignition switch is turned on and the vehicle is driven at 35 km/h (22 mph) or more for approximately 5 seconds. The ecu also stores the previous zero point. If front wheel alignment or the steering wh ...

Removal
Hint: Use the same procedures for the rh side and lh side. The procedures listed below are for the lh side. When removing the moulding, heat the vehicle body and moulding using a heat light. Standard heating temperature Notice: Do not heat the vehicle body and moulding excessively. ...

If you think something is wrong
If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your toyota dealer as soon as possible. Visible symptoms Fluid leaks under the vehicle (water dripping from the air conditioning after use is normal.) Flat-looking tires or uneven tire w ...

В© 2011-2022 Copyright www.trav4.net