Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Head-up Display

Concept

This system projects important information into the driver's field of vision, for instance the speed.

The driver can get information without averting his or her eyes from the road.

General information

Follow the information on cleaning the Head-up Display.

Overview

Overview


Switching on/off

Via iDrive:

  1. "CAR"
  2. "Settings"
  3.  "Displays"
  4.  "Head-up display"
  5.  "Head-up display"

Display

Overview

The following information is displayed on the Head-up Display:

Some of this information is only displayed briefly as needed.

Selecting displays in the Head-up Display

  1. Via iDrive:
  2. "CAR"
  3. "Settings"
  4. "Displays"
  5. "Head-up display"
  6.  Select the desired setting.

The setting is stored for the driver profile currently used.

Setting the brightness

The brightness is automatically adjusted to the ambient brightness.

The basic setting can be adjusted manually.

Via iDrive:

  1. "CAR"
  2.  "Settings"
  3.  "Displays"
  4.  "Head-up display"
  5. "Brightness"
  6. Turn the Controller until the desired brightness is set.
  7.  Press the Controller.

When the low beams are switched on, the brightness of the Head-up Display can be additionally influenced using the instrument lighting.

Adjusting the height

Via iDrive:

  1. "CAR"
  2. "Settings"
  3. "Displays"
  4. "Head-up display"
  5. "Height"
  6. Turn the Controller until the desired height is reached.
  7. Press the Controller.

The setting is stored for the driver profile currently used.

The height of the Head-up Display can also be stored using the memory function.

Setting the rotation

The Head-up Display view can be rotated.

Via iDrive:

  1. "CAR"
  2. "Settings"
  3. "Displays"
  4.  "Head-up display"
  5.  "Rotation"
  6.  Turn the Controller until the desired setting is selected.
  7. Press the Controller.

Additional settings

Via iDrive:

  1. "CAR"
  2.  "Settings"
  3. "Displays"
  4. "Head-up display"
  5. Select the desired setting:

Visibility of the display

The visibility of the displays in the Head-up Display is influenced by the following factors:

If the image is distorted, have the basic settings checked by a dealer's service center or another qualified service center or repair shop.

Special windshield

The windshield is part of the system.

The shape of the windshield makes it possible to display a precise image.

A film in the windshield prevents double images from being generated.

For this reason, it is strongly suggested to have the special windshield replaced by a dealer's service center or another qualified service center or repair shop, if necessary.

Trip data
Concept Values for the trip, such as the average consumption or trip miles, are displayed. General information The trip data can be displayed on the Control Display and in the instrument cluster. The ...

Lights
...

Other materials:

Display settings
Settings are available for adjusting the contrast and brightness of the screen. Screen for display settings Press the “setup” button. Select “display” on the “setup” screen. Adjust the screen display Adjust the camera display* Changes to day mode. *: If equipped ...

Brake rear brake flexible hose
Components Removal Hint: Use the same procedures for the lh side and rh side. The procedures listed below are for the lh side. Remove rear wheel Drain brake fluid Notice: Wash off brake fluid immediately if it comes in contact with any painted surface. Remove rear brake ...

Seat position airbag sensor circuit malfunction
Description The seat position sensor circuit consists of the center airbag sensor and the seat position sensor. Dtc b1653/35 is recorded when a malfunction is detected in the seat position sensor circuit. Wiring diagram Inspection procedure Check for dtc Turn the ...

© 2011-2022 Copyright www.trav4.net