Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: LATCH child restraint fixing system

General information

LATCH: Lower Anchors and Tether for Children.

Pay attention to the specifications and the operating and safety information from the child restraint system manufacturer when selecting, installing, and using LATCH child restraint fixing systems.

Mounts for the lower LATCH anchors

General information

The lower anchors may be used to attach the CRS to the vehicle seat up to a combined child and CRS weight of 65 lbs/30 kg when the child is restrained by the internal harnesses.

Safety information

Warning


If the LATCH child restraint fixing systems are not correctly engaged, the protective effect of the LATCH child restraint fixing system can be limited. There is a risk of injuries or danger to life. Make sure that the lower anchors are securely engaged and that the LATCH child restraint fixing system fits securely against the backrest.

Position

Symbol/ Meaning

- The corresponding symbol
shows the mounts for the lower LATCH anchors.

Seats equipped with lower anchors are marked with a pair, (2), of LATCH symbols.

For vehicles equipped with a middle seat: It is not recommended to use the inner lower anchors of standard outer LATCH positions to fasten a child restraint system on the middle seat. Use the vehicle safety belt instead for the middle seat.

Before installing LATCH child restraint fixing systems

Pull the safety belt away from the area of the child restraint system.

Without comfort rear seats: assembly of LATCH child restraint fixing systems

  1. Install child restraint system, see manufacturer's information.
  2. Ensure that both LATCH anchors are properly engaged.

With comfort rear seats: assembly of LATCH child restraint fixing systems

  1. Before mounting, adjust the seats to their basic position.

    Reset to standard position.

  2.  For better accessibility, tilt the backrest back slightly.
  3. Install child restraint system, see manufacturer's information.
  4. Ensure that both LATCH anchors are properly engaged.
  5. After mounting, move the backrest back up slightly so that the child restraint system rests lightly against the backrest.
Installing child restraint systems
General information Pay attention to the specifications and the operating and safety information of the child restraint system manufacturer when selecting, installing, and using child restraint system ...

Child restraint systems with tether strap
Safety information Warning If the upper retaining strap is incorrectly used for the child restraint system, the protective effect can be reduced. There is a risk of injury. Make sure that the upper ...

Other materials:

All doors cannot be locked / unlocked simultaneously
Description The main body ecu receives switch signals from the door control switch on the power window regulator master switch, door control switch and driver side door key cylinder, and activates the door lock motor on each door accordingly. Wiring diagram Inspection procedure Perf ...

BMW Remote Software Upgrade- Search for and download of an upgrade
General information There are various options to search for and download an upgrade: Automatic. Via iDrive. Via BMW Connected app. Automatic download The available data for Remote Software Upgrade is automatically loaded into the vehicle. The download does not require an approval. Via iDrive ...

Cold start
Description The electronic throttle control system (etcs) controls the engine idling speed. The etcs operates the throttle actuator to open and close the throttle valve, and adjusts the intake air amount to achieve the target idling speed. In addition, the ecm retards the ignition timi ...

В© 2011-2022 Copyright www.trav4.net