Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Opening and closing

Buttons on the vehicle key

Buttons on the vehicle key


  1. Unlocking
  2. Locking
  3. Opening the trunk lid
  4. Press and hold or press three times in quick succession: panic mode Press briefly: pathway lighting

Unlocking the vehicle

Press the button on the vehicle
key

Depending on the settings, either only the driver's door or all vehicle access points are unlocked.

If only the driver's door is unlocked, press the button on the vehicle key again to unlock the other vehicle access points.

Press and hold the button on the
vehicle key after unlocking.

The windows and the glass sunroof are opened, as long as the button on the vehicle key is pressed.

Locking the vehicle

  1. Close the driver's door.
  2. Press the button on the
    vehicle key.

    All vehicle access points are locked.

Buttons for the central locking system

Overview

Buttons for the central locking system


Buttons for the central locking system.

Locking

Press the button with the front
doors closed.

The fuel filler flap remains unlocked.

Unlocking

Press the button.


Panic mode

You can trigger the alarm system if you find yourself in a dangerous situation.

To switch off the alarm: press any button.

Entering
...

Comfort Access
Concept The vehicle can be accessed without operating the vehicle key. Carrying the vehicle key with you, e.g., in your pants pocket, is sufficient. The vehicle automatically detects the vehicle key ...

Other materials:

Compressor and pulley (for 2az-fe)
Components Removal Discharge refrigerant from refrigeration system (see page ac-172) Disconnect cable from negative battery terminal Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensione ...

Torque converter clutch solenoid performance (shift solenoid valve dsl)
Description The ecm uses the signals from the throttle position sensor, air-flow meter, turbine (input) speed sensor, intermediate (counter) shaft speed sensor and crankshaft position sensor to monitor the engagement condition of the lock-up clutch. Then the ecm compares the engagement ...

Installation (2006/01- )
Install abs and traction actuator assembly with bracket Notice: do not remove the hole plug before connecting the brake tube. new actuators are filled with brake fluid. Install the actuator with bracket with the 3 nuts. Torque: 19 n*m (194 kgf*cm, 14 ft.*Lbf) Hint: The nuts should b ...

В© 2011-2022 Copyright www.trav4.net