Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Operation via touchpad

General information

Some iDrive functions can be operated using the touchpad on the Controller.

Selecting functions

Via iDrive:

  1. "CAR"
  2. "Settings"
  3.  "General settings"
  4. "Touchpad"
  5. Select the desired setting:

Entering letters and numbers

Entering special characters

Input /Operation

Delete a character.- Swipe to the left on the touchpad.

Enter a blank space.- Swipe to the right in the center of the touchpad.

Enter a hyphen. - Swipe to the right in the upper area of the touchpad.

Enter an underscore.- Swipe to the right in the lower area of the touchpad.

Using the map

The map in the navigation system can be moved via the touchpad.

Function / Operation

Move map. - Swipe in the appropriate direction.

Enlarge/shrink map.- Drag in or out on the touchpad with fingers.

Display menu. - Tap once.

Operation via touchscreen

General information

The Control Display is equipped with a touchscreen.

You can tap on menu items and widgets. Touch the screen with your fingers. Do not use any objects.

Opening the main menu

Tap on the symbol.


Opening the main menu


The main menu is displayed.

Adjusting widgets

The widgets can be adjusted in the main menu.

It is possible to create multiple pages with widgets and switch between pages. The adjustments can only be performed when the vehicle is stationary.

Via iDrive:

  1. Select the desired page in the main menu.

    Only the currently selected page can be adjusted.

  2. Tap the symbol in the main
    menu.
  3. Select the desired adjustment:
  1. Tap "Done".

Showing/hiding the display bar

In the upper area of the Control Display, it is possible to show or hide a display bar with additional functions.

Changing between displays

After a menu item is selected, a new display opens.

An arrow indicates that additional displays can be opened.

The new display opens.

Entering letters and numbers

Input

  1. When approaching the touchscreen, a keyboard appears on the Control Display.
  2.  Enter desired letters and numbers.

Deleting

Symbol /Function

- Tapping the symbol: deletes
the letter or number.

- Tapping and holding the symbol
all letters: deletes all letters or numbers.

Using the map

The navigation map can be moved using the touchscreen.

Function /Operation

Move map. - Swipe in the appropriate direction.

Enlarge/shrink map.- Drag in or out with the fingers.

Display menu. - Tap once.

Operating via the Controller
Opening the main menu Press the button. The main menu is displayed. Selecting a menu Selecting menu items Turn the Controller until the desired menu item is highlighted.  Press the Controll ...

Voice activation system
Concept The voice activation system can be used to operate functions with spoken commands. The system supports you with announcements during input. The voice control system and the feedback it provid ...

Other materials:

Removal
Remove radiator grille sub-assembly Remove the 4 bolts and 4 nuts. Detach the 6 claws and remove the radiator grille. Remove no. 1 Radiator grille lower Detach the 16 claws and remove the radiator grille. Remove no. 2 Radiator grille lower Detac ...

Air-fuel ratio (a/f) and heated oxygen (ho2) sensor heater monitors (front a/f and rear ho2 sensor type)
Preconditions The monitor will not run unless: The mil is off. Drive pattern Connect the intelligent tester to the dlc3. Turn the ignition switch on. Turn the tester on. Clear dtcs (if set) (see page es-35). Start the engine. Allow the engine to idle for 10 minute ...

Insufficient coolant temperature for closed loop fuel control
Description Refer to dtc p0115 (see page es-105). Monitor description The resistance of the ect sensor varies in proportion to the actual ect. The ect supplies a constant voltage to the sensor and monitors the signal output voltage of the sensor. The signal voltage output varies acc ...

В© 2011-2022 Copyright www.trav4.net