Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Parking brake- Automatic Hold

Concept

This system assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic.

The vehicle is automatically held in place when it is stationary.

On uphill grades the system prevents the vehicle from rolling backward when driving off

General information

Under the following conditions, the parking brake is automatically engaged:

Display

The indicator light changes from
green to red.

Safety information

Warning


An unsecured vehicle can begin to move and possibly roll away. There is a risk of accident.

Before exiting, secure the vehicle against rolling.

In order to ensure that the vehicle is secured against rolling away, follow the following:

Warning


Unattended children or animals in the vehicle can cause the vehicle to move and endanger themselves and traffic, for instance due to the following actions:

There is a risk of accidents or injuries. Do not leave children or animals unattended in the vehicle.

Take the vehicle key with you when exiting and lock the vehicle.

NOTICE


If the vehicle is stationary, Automatic Hold engages the parking brake and prevents the vehicle from rolling in a car wash. There is a risk of damage to property. Deactivate Automatic Hold prior to entering the car wash.

Overview

Overview


Automatic Hold


Establishing function readiness of Automatic Hold

  1. Switch on drive-ready state.
  2. Press the button.

The LED lights up.

The indicator light lights up
green.

Automatic Hold is functional.

After every new vehicle start, the last selected setting is active.

Automatic Hold holding the vehicle

Function readiness is established and the driver's door is closed.

After stepping on the brake pedal, for instance when stopping at a traffic light, the vehicle is automatically secured against rolling.

The indicator light lights up
green.

Driving off

Step on the accelerator pedal to drive off.

The brake is released automatically and the indicator light of the parking brake is no longer illuminated.

Activating the parking brake automatically

The parking brake is automatically set if driveready state is switched off while the vehicle is being held by Automatic Hold or if the vehicle is exited.

The indicator light changes from
green to red.

The parking brake is not set automatically, if the drive-ready state is switched off, while the vehicle is coasting to a halt. Automatic Hold is deactivated.

Switching function readiness off

Press the button.


The LED goes out

The indicator light goes out.


Automatic Hold is switched off.

If the vehicle is being held by Automatic Hold, press additionally on the brake pedal, when switching off.

Malfunction

If the parking brake fails or malfunctions, secure the vehicle against rolling before exiting.

A Check Control message is displayed.

Secure the vehicle against rolling away, for instance with a wheel chock, after exiting the vehicle.

After a power failure

To reestablish parking brake functionality after a power failure:

  1. Switch on standby state.
  2. Pull the switch while
    stepping on the brake pedal or selector lever position P is set and then push.

This process may take a few seconds. Some mechanical sounds associated with this process are normal.

The indicator light is no longer
illuminated as soon as the parking brake is ready for operation again.

Parking brake
Concept The parking brake is used to prevent the vehicle from rolling when it is parked. Safety information Warning An unsecured vehicle can begin to move and possibly roll away. There is a risk of a ...

Turn signal
Turn signal in exterior mirror When driving and during operation of the turn signals or hazard warning system, do not fold in the exterior mirrors, so that the signal lights on the exterior mirror are ...

Other materials:

Seat position sensor
Components On-vehicle inspection Check seat position sensor (vehicle not involved in collision) Perform a diagnostic system check (see page rs- 49). Check seat position sensor (vehicle involved in collision) Perform a diagnostic system check (see page rs- 49). Ev ...

Vehicle key- Trunk lid
General information To avoid locking the vehicle key in the vehicle, do not place the vehicle key in the cargo area. You can set up if the doors will be unlocked when the trunk lid is opened with the vehicle key. Safety information Warning Body parts can be jammed when operating the trunk lid. The ...

On-vehicle inspection
Connect intelligent tester Connect the intelligent tester to the dlc3. Start the engine and idle it. Select the active test mode on the intelligent tester. Hint: Please refer to the intelligent tester operator's manual for further details. Check actuator motor operation ...

В© 2011-2022 Copyright www.trav4.net