Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Run-flat tires

Concept

Run-flat tires permit continued driving under restricted conditions even in the event of a complete loss of tire inflation pressure.

General information

The wheels consist of tires that are self-supporting, to a limited degree, and possibly special rims.

The support of the sidewall allows the tire to remain drivable to a restricted degree in the event of a tire inflation pressure loss.

Follow the instructions for continued driving with a flat tire.

Safety information

 Warning

The vehicle handles differently when a run-flat tire has insufficient or no tire pressure; for instance, reduced lane stability when braking, braking distances are longer and the self-steering properties will change. There is a risk of accident.

Drive moderately and do not exceed a speed of 50 mph/80 km/h.

Label

Label


The tires are marked on the tire sidewall with Run-flat System Component RSC.

Repairing a flat tire

Safety measures

Mobility System

Concept

With the Mobility System, minor tire damage can be sealed temporarily to enable continued travel.

To accomplish this, sealant is pumped into the tires, which seals the damage from the inside.

General information

Overview

Storage

Storage


The Mobility System is in the left storage compartment of the cargo area.

Sealant container

Sealant container


Observe use-by date on the sealant container.

Compressor

Compressor


  1. Sealant container unlocking
  2. Sealant container holder
  3. Tire pressure gage
  4. Reduce tire inflation pressure button
  5. On/off switch
  6. Compressor
  7. Connector/cable for socket
  8. Connection hose

Safety measures

Changing wheels and tires
Mounting and wheel balancing Have mounting and wheel balancing carried out by a dealer's service center or another qualified service center or repair shop. Wheel and tire combination General informati ...

Mobility System - Filling the tire with sealant
Safety information DANGER   If the exhaust pipe is blocked or ventilation is insufficient, harmful exhaust gases can enter into the vehicle. The exhaust gases contain pollutants which are col ...

Other materials:

Removal
Disconnect cable from negative battery terminal Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation. Remove no. 1 Engine under cover Remove front fender apron rh Remove radia ...

All doors cannot be locked / unlocked simultaneously
Description The main body ecu receives switch signals from the door control switch on the power window regulator master switch, door control switch and driver side door key cylinder, and activates the door lock motor on each door accordingly. Wiring diagram Inspection procedure Perf ...

Front fog light circuit
Description The main body ecu controls the front fog light relay (marking: fr fog) when a signal is received from the headlight dimmer switch. Wiring diagram Inspection procedure Perform active test by intelligent tester Connect the intelligent tester (with can vim) to the dlc3 ...

В© 2011-2022 Copyright www.trav4.net