BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Safety
- Airbags
- Airbags- Protective effect
- Automatic deactivation of the front-seat passenger airbags
- Intelligent Safety
- Front collision mitigation
- Front collision mitigation- Switching on/off
- Front collision mitigation- System limits
- Evasion Assistant
- Evasion Assistant- Warning with evasion support
- Intersection collision warning
- Intersection collision warning- Switching on/off
- Intersection collision warning- System limits
- Person warning with City braking function
- Person warning with City braking function- Switching on/off
- Night Vision with pedestrian and animal detection
- Night Vision with pedestrian and animal detection- Warning function
- Lane departure warning
- Lane departure warning- Warning function
- Blind spot collision warning
- Blind spot collision warning- Warning function
- Side collision mitigation
- Side collision mitigation- Switching on/off
- Rear collision preparation
- If equipped with Equipment Stop Assistant
- BMW Drive Recorder
- Active Protection
- PostCrash - iBrake
Ambient highlight
General information
The ambient highlight illuminates the door pillars
in the rear.
When opening a rear door, the brightness of the
ambient highlight of the respective door pillar is
reduced. After t ...
Airbags
Vehicle features and
options
This chapter describes all standard, country-specific
and optional features offered with the series.
It also describes features and functions that are
not necessarily ava ...
Other materials:
Engine immobiliser system malfunction
Description
This dtc is output when one of the following occurs: 1) the ecm detects
errors in its own
communications with the transponder key ecu; 2) the ecm detects errors in the
communication lines; or
3) the ecu communication id between the transponder key ecu and ecm is different
an ...
Fail-safe chart
Fail-safe function
When communication fails in any of the main wires
(communication lines) due to a short circuit or other
causes, the fail-safe function, which is specified for
each system, operates to prevent the system from
malfunctioning.
The table below shows the effects on e ...
Differential oil
On-vehicle inspection
Check differential oil
Stop the vehicle on a level surface.
Using a 10 mm socket hexagon wrench, remove the
rear differential filler plug and gasket.
Check that the oil level is between 0 to 5 mm (0 to
0.20 In.) From the bottom lip of the different ...
