Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Safety belts- Correct use of safety belts

Buckling the safety belt

  1. Guide the safety belt slowly over shoulder and hip to put it on.
  2.  Insert the tongue plate into the safety belt buckle. The safety belt buckle must engage audibly.

Buckling the safety belt

When the safety belt is fastened, the driver's and passenger's belt straps are automatically tightened once after driving away.

Unbuckling the safety belt

  1. Hold the safety belt firmly.
  2.  Press the red button in the safety belt buckle.
  3. Guide the safety belt back into its roll-up mechanism.

Belt loop

Belt loop

When fastening the safety belts on the rear seats, make sure that the belt loop is closed.

Safety belt reminder for driver's seat and front passenger seat

Display in the instrument cluster

The indicator light lights up
and a signal sounds. Make sure that the safety belts are positioned correctly. The safety belt reminder can also be activated if objects are placed on the front passenger seat.

Safety mode

In critical situations, for instance during an emergency stop, the front safety belts tighten automatically.

If the situation passes without an accident occurring, the belt tension relaxes.

If the belt tension does not loosen automatically, stop the vehicle and unbuckle the safety belt using the red button in the safety belt buckle. Fasten the safety belt before continuing on your trip.

Safety belts
Number of safety belts and safety belt buckles The vehicle is fitted with four or five safety belts to ensure occupants' safety. However, they can only offer protection when adjusted correctly. The t ...

Front head restraints
General information The current head restraint position can be stored using the memory function. Safety information Warning A missing protective effect due to removed or not correctly adjusted head r ...

Other materials:

Displaying a bluetooth® device details
You can confirm and change the registered device details. Bluetooth® device registration status Display the “bluetooth* setup” screen. *: Bluetooth is a registered trademark of bluetooth sig, inc. Select the device. Select “device info”. Following screen is displayed: ...

Registering a bluetooth® phone for the first time
To use the hands-free system, it is necessary to register a bluetooth® phone with the system. Once the phone has been registered, it is possible to use the hands-free system. For details about registering a bluetooth® device Turn the bluetooth® connection setting of your cellular phon ...

Checking monitor status
Perform monitor drive pattern Connect the intelligent tester to the dlc3. Turn the ignition switch and the tester on. Clear the dtcs (see page es-35). Run the vehicle in accordance with the applicable drive pattern described in readiness monitor drive pattern (see page es-19). Do ...

© 2011-2022 Copyright