Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Steptronic transmission- Engaging selector lever positions

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals / Controls / Driving / Steptronic transmission- Engaging selector lever positions

General information

To prevent the vehicle from creeping after you select a drive mode, maintain pressure on the brake pedal until you are ready to start.

Functional requirements

Only when the drive-ready state is switched on and the brake pedal is depressed is it possible to change from selector lever position P to another selector lever position.

The selection lever position P cannot be changed until all technical requirements are met.

Engaging selector lever position D, N, R

A selector lever lock prevents the following faulty operation:

  1. Fasten driver's safety belt.
  2. Press and hold the button to release the selector lever lock.

Engaging selector lever positions


  1. Push the selector lever in the desired direction, past a resistance point, if needed. The selector lever automatically returns to the center position when released.

Engaging selector lever positions


Engaging selector lever position P

Engaging selector lever position P


Press button P.

Rolling or pushing the vehicle

General information

In some situations, the vehicle is to roll without its own power for a short distance, for instance in a car wash, or be pushed.

Engaging selector lever position N

  1. Switch on drive-ready state while pressing on the brake pedal.
  2. If necessary, release the parking brake.
  3. If necessary, switch off Automatic Hold. Automatic Hold, refer to page
  4. Depress the brake pedal.
  5. Touch the selector lever lock and engage selector lever position N.
  6. Switch off drive-ready state.

In this way, standby state remains switched on, and a Check Control message is displayed.

The vehicle can roll.

NOTICE


Selector lever position P is automatically engaged when standby state is switched off.

There is a risk of damage to property. Do not switch standby state off in vehicle washes.

Selector lever position P is engaged automatically after approximately 35 minutes.

If there is a malfunction, you may not be able to change the selector lever position.

Electronically unlock the transmission lock, if needed.

Kickdown

Kickdown is used to achieve maximum driving performance.

Step on the accelerator pedal beyond the resistance point at the full throttle position.

Sport program M/S

Concept

The shifting points and shifting times in the Sport program are designed for a sportier driving style. The transmission, for instance shifts up later and the shifting times are shorter.

Activating the Sport program

Activating the Sport program


Press the selector lever to the left from selector lever position D.

The engaged gear is displayed in the instrument cluster, for instance S1.

The sport program of the transmission is activated.

Ending the Sport program

Push the selector lever to the right.

D is displayed in the instrument cluster.

Steptronic transmission
Concept The Steptronic transmission combines the functions of an automatic transmission with the possibility of manual shifting, if needed. Safety information Warning An unsecured vehicle can begin t ...

Steptronic transmission- Manual mode M/S
Concept Manual gear-shifting is possible in manual mode. Activating manual mode Press the selector lever to the left from selector lever position D, arrow 1. Push the selector lever forward or ...

Other materials:

Initialization
Initialize sliding roof drive gear subassembly Notice: When replacing the sliding roof drive gear, the sliding roof drive gear requires initialization. If a reset is not executed, the following functions do not operate: auto operation and key off operation. Turn the ignition switch on. ...

Room temperature sensor circuit
Description The room temperature sensor is installed in the instrument panel to detect the room temperature and control the heater and air conditioner auto mode. The resistance of the room temperature sensor changes in accordance with the room temperature. As the temperature decreases, ...

Washer motor
Components Removal Disconnect cable from negative battery terminal Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation. Remove washer inlet sub-assembly Remove th ...

В© 2011-2022 Copyright www.trav4.net