Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Tire inflation pressure

Vehicle features and options

This chapter describes all standard, country-specific and optional features offered with the series.

It also describes features and functions that are not necessarily available in your vehicle, e.g., due to the selected options or country versions. This also applies to safety-related functions and systems.

When using these functions and systems, the applicable laws and regulations must be observed.

Tire inflation pressure

General information

The tire characteristics and tire inflation pressure influence the following:

Safety information

Warning


A tire with too little or no tire inflation pressure may heat up significantly and sustain damage.

This will have a negative impact on aspects of handling, such as steering and braking response.

There is a risk of accident. Regularly check the tire inflation pressure, and correct it as needed, for instance twice a month and before a long trip.

Tire inflation pressure specifications

In the tire inflation pressure table

The tire inflation pressure table, contains all tire inflation pressure specifications for the specified tire sizes at the ambient temperature. The tire inflation pressure values apply to tire sizes approved by the manufacturer of the vehicle for the vehicle type.

To identify the correct tire inflation pressure, please note the following:

On the Control Display

The current tire inflation pressure values and the intended tire inflation pressure values for the mounted tires can be displayed on the Control Display.

To ensure that they are displayed correctly, the tire sizes must be stored in the system and must have been set for the mounted tires.

The current tire inflation pressure value is located on each tire.

The reference tire inflation pressure value is located in the lower area of the Control Display.

Checking the tire inflation pressure

General information

Tires heat up while driving. The tire inflation pressure increases with the tire temperature.

Tires have a natural, consistent loss of tire inflation pressure.

The displays of inflation devices may under-read by up to 0.1 bar/2 psi.

Checking using tire inflation pressure specifications in the tire inflation pressure table

  1. Determine the intended tire inflation pressure levels for the mounted tires.
  2.  Check the tire inflation pressure in all four tires, using a pressure gage, for example.
  3. Correct the tire inflation pressure if the actual tire inflation pressure deviates from the intended tire inflation pressure.
  4.  Check whether all valve caps are screwed onto the tire valves.

The tire inflation pressure specifications in the tire inflation pressure table only relate to cold tires or tires at the same temperature as the ambient temperature.

Only check the tire inflation pressure levels when the tires are cold, i.e.:

Check the tire inflation pressure of the emergency wheel in the cargo area regularly, and correct it as needed.

Checking using the tire inflation pressure specifications on the Control Display

Via iDrive:

  1. "CAR"
  2.  "Vehicle status"
  3. "Tire Pressure Monitor"
  4. Check whether the current tire inflation pressure levels deviate from the intended tire pressure value.
  5. Correct the tire inflation pressure if the actual tire inflation pressure deviates from the intended tire inflation pressure.

After correcting the tire inflation pressure

With runflat tires: Reinitialize the Flat Tire Monitor.

With Tire Pressure Monitor: The corrected tire inflation pressures are applied automatically. Make sure that the correct tire settings have been made.

With tires that cannot be found in the tire pressure values on the Control Display, reset the Tire Pressure Monitor TPM.

Wheels and tires
...

Tire inflation pressure- Tire inflation pressures up to 100 mph/160 km/h
For speeds of up to 100 mph/160 km/h and for optimum driving comfort, note the pressure values in the tire inflation pressure table and adjust as necessary. These pressure values can also be found o ...

Other materials:

Trailer towing
Your vehicle is designed primarily as a passenger-and-load-carrying vehicle. Towing a trailer can have an adverse impact on handling, performance, braking, durability, and fuel consumption. For your safety and the safety of others, you must not overload your vehicle or trailer. You must also e ...

Torque sensor
Description The torque sensor converts the rotation torque input from the steering wheel into electric signals and sends them to the power steering ecu. Wiring diagram Inspection procedure Check connector connection condition (torque sensor - ecu) Check the installation c ...

Using the bluetooth® audio/phone
Audio unit Bluetooth® connection condition If “bt” is not displayed, the bluetooth® audio/phone cannot be used. Displays set up menu Selects items such as menu and number Turn: selects an item Press: inputs the selected item Off-hook switch Turns the hands-free sy ...

© 2011-2022 Copyright www.trav4.net