Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: With Parking Assistant: Parking Assistant- Switching on and activating

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals / Controls / Driver assistance systems / With Parking Assistant: Parking Assistant- Switching on and activating

Switching on with the button

Press the park assistance button.


The LED lights up.

The current status of the parking space search is indicated on the Control Display.

Parking assistant is activated
automatically.

Switching on with reverse gear

  1. Shift into reverse.

    The current status of the parking space search is indicated on the Control Display.

  2. If necessary, activate:
    "Autom. Parking"

Switching on via iDrive

Display of the rearview camera or PDC view must be active.

  1. Move the Controller to the right.
  2.  Activate the parking assistant on the Control Display: "Autom. Parking"

Display on the Control Display

System activated/deactivated

Symbol/ Meaning

Gray: the system is not
available.

White: the system is available but not activated.

System is activated.


Parking space search is active.


The parking procedure is active.
The system takes over the steering.

Parking space search and system status

Parking space search and system status


Signal tones

Switching signal tone for suitable parking spaces on/off

Via iDrive:

  1. "CAR"
  2. "Settings"
  3.  "Driver Assistance"
  4. "Parking and maneuvering"
  5. "Automatic Parking"
  6. "Alert if parking space detected"

The setting is stored for the driver profile currently used.

Signal tones of the PDC Park Distance Control

During an automatic parking operation, no intermittent tone will sound from the PDC Park Distance Control.

A continuous tone sounds when the distance to a detected object is less than approx. 8 inches/ 20 cm.

Parking using the parking assistant

Parking

  1. Switching on and activating the parking assistant.

    For this, engage the reverse gear or press the parking assist button and activate the system on the Control Display, if needed.

    Parking assistant is activated.


  2. Pass the row of parked vehicles forward at a speed of up to approx. 22 mph/35 km/h and at a distance of maximum 5 ft/1.5 m.

    The status of the parking space search and possible parking spaces are displayed on the Control Display.

  3. Confirm the suggested parking space for the parking process: select the parking space on the Control Display.

    The system takes over the steering.

  4. Follow the instructions on the Control Display.

    At the end of the parking procedure, the P selector lever position is set.

    The end of the parking procedure is indicated on the Control Display.

  5. Adjust the parking position yourself, if needed.

Interrupting manually

The parking assistant can be interrupted at any time:

Interrupting automatically

The system is interrupted automatically in the following situations:

A Check Control message is displayed.

Resuming

An interrupted parking procedure can be continued, if needed.

Reactivate the parking assistant and follow the instructions on the Control Display.

Switching off

The system can be switched off manually:

Press the park assistance button.


With Parking Assistant: Parking Assistant
Concept The system supports the driver in the following situations: When parking parallel to the road, parallel parking. When reverse parking diagonally to the road, diagonal parking. The syste ...

With Parking Assistant: Parking Assistant- Driving out of a parking space using the parking assistant
Concept The system makes driving out of parallel parking spaces easier. General information Steptronic transmission The parking assistant calculates an optimal line for pulling out of a parking space ...

Other materials:

Indicator/warning lights- Green lights
Turn signal Turn signal switched on. Unusually rapid flashing of the indicator light indicates that a turn signal bulb has failed. Additional information: Turn signal Parking lights Parking lights are switched on. Additional information: Parking lights/low beams Low beams Low beams are switched on ...

Operating a bluetooth® enabled portable player
Power Volume Search playback Next commands, random play or back button Repeat play Fast-forwarding, rewinding or selecting an album Changing the audio source/ playback Playback/pause Previous commands Selecting a track Displaying text message Selecting an album P ...

Evaporator temperature sensor circuit
Description The no. 1 Cooler thermistor (evaporator temperature sensor) is installed on the evaporator in the air conditioning unit to detect the temperature of the cooled air that has passed through the evaporator and to control the air conditioner. It sends signals to the air conditioni ...

© 2011-2022 Copyright www.trav4.net