Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Without Surround View: rearview camera

Concept

The rearview camera provides assistance in parking and maneuvering backwards. The area behind the vehicle is shown on the Control Display.

Additionally, assistance functions can be shown in the display, e.g., help lines.

Safety information

Warning


The system cannot serve as a substitute for the driver's personal judgment in assessing the traffic conditions. There is a risk of accident.

Adjust driving style to traffic conditions. Watch traffic and vehicle surroundings closely and actively intervene where appropriate.

Overview

Depending on the vehicle equipment: button in the vehicle

Depending on the vehicle equipment: button in the vehicle


Park assistance button


Camera

Camera


The camera lens is located in the handle of the trunk lid.

The image quality may be impaired by dirt. If necessary, clean the camera lens.

Switching on/off

Switching on automatically

The system is switched on automatically if selector lever position R is engaged when the engine is running.

Automatic deactivation during forward travel

The system switches off when a certain driving distance or speed is exceeded.

Switch the system back on, if needed.

Depending on the vehicle equipment: switching on/off manually

Press the park assistance button.


The parking assistance functions are shown on the Control Display.

Switching the view via iDrive

If the rearview camera view is not displayed, change the view via iDrive:

  1. If necessary, tilt the controller to the side.
  2. "Rear view camera"

The rearview camera image is displayed.

Functional requirements

Display on the Control Display

Function bars

The assistance functions can be activated manually via the function bars on the sides of the Control Display.

Via iDrive:

  1. Move the Controller to the right, if needed.
  2. With corresponding equipment:
    "Camera image"
  3.   "Parking aid lines".

"Obstacle mark.".


Depending on the vehicle equipment, the obstacles detected by PDC Park Distance Control are displayed by markings.

More than one assistance function can be active at the same time.

Parking aid lines

Pathway lines

Pathway lines


Pathway lines help you to estimate the space required when parking and maneuvering on level roads.

Pathway lines depend on the steering angle and are continuously adjusted to the steering wheel movements.

Turning radius lines

Turning radius lines


Turning radius lines can only be superimposed on the camera image together with pathway lines.

Turning radius lines show the course of the smallest possible turning radius on a level road.

Only one turning radius line is displayed after the steering wheel is turned past a certain angle.

Parking using pathway and turning radius lines

  1. Position the vehicle so that the red turning radius line leads to within the limits of the parking space.
  2. Turn the steering wheel to the point where the green pathway line covers the corresponding turning radius line.

Obstacle marking

Obstacle marking


Depending on the vehicle equipment, obstacles behind the vehicle are detected by the PDC Park Distance Control sensors.

Obstacle markings can be faded into the image of the rearview camera.

The colored thresholds of the obstacle markings match the markings of the PDC Park Distance Control.

Setting brightness and contrast via iDrive

With the rearview camera switched on:

  1. Move the Controller to the right, if needed.
  2. "Camera image"

  3.  To perform the desired setting:

System limits

Deactivated camera

When the camera is deactivated, for instance when the trunk lid is open, the camera image is displayed hatched in gray.

Detection of objects

Very low obstacles as well as high, protruding objects such as ledges may not be detected by the system.

Depending on the vehicle equipment, some assistance functions also consider data from the PDC Park Distance Control.

Follow the notes in the PDC Park Distance Control chapter.

The objects displayed on the Control Display may be closer than they appear. Do not estimate the distance from the objects on the display.

PDC Park Distance Control- System limits
Safety information Warning The system is designed to operate in certain conditions and circumstances. Due to conditions or other factors, the system may not respond. There may be a risk of accident ...

With Parking Assistant Plus: Surround View
Concept The system provides assistance in parking and maneuvering. The area around the vehicle is shown on the Control Display. General information Several cameras capture the area from different sele ...

Other materials:

Brake system malfunction
Description This dtc is output when the vsc system has a problem. Check the vsc system when this dtc is output. Inspection procedure Hint: This circuit uses can communication. Therefore, if there are any malfunctions in the communication circuit, one or more dtcs in the can communi ...

Brake pedal load sensing switch
Description The brake pedal load sensing switch is turned on when the brake pedal is depressed with force exceeding a predetermined level. The skid control ecu detects if the brake pedal is depressed or not via this circuit. Wiring diagram Inspection procedure Notice: When repla ...

Open in one side of can branch line
Description If 2 or more ecus and/or sensors do not appear on the intelligent tester's "bus check" screen via the can vim, one side of the can branch wire may be open. (One side of the canh [branch wire] /canl [branch wire] of the ecu and/or sensor is open.) Wiring diagram ...

В© 2011-2022 Copyright www.trav4.net