Toyota RAV4 Service Manual: 2Az-fe ignition
Installation
Install accelerator pedal rod
Install the accelerator pedal rod with the 2 bolts.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*Lbf)
Connect the accelerator pedal position sensor
connector.
...
Ignition system
...
Other materials:
Transmitter id
Description
Hint:
It is necessary to perform the procedure to identify the tire pressure
monitor valve that is malfunctioning
because it cannot be identified by the output dtc.
Inspection procedure
Notice:
It is necessary to register an id code after replacing the tire pressure
wa ...
Body
General maintenance
Tighten bolts and nuts
Tighten the bolts and nuts on the chassis parts listed
below, if necessary.
Front axle and suspension
Drivetrain
Rear axle and suspension
Brake system
Engine mounting
Other chassis parts
Tighten the bolts and nuts on the bo ...
Removal
Disconnect cable from negative battery
terminal
Caution:
Wait at least 90 seconds after disconnecting the
cable from the negative (-) battery terminal to
prevent airbag and seat belt pretensioner activation.
Remove generator assembly
Remove the generator assembly from the vehicl ...
