Toyota RAV4 manuals

Toyota RAV4 (XA50) 2019-2024 Owners Manual: Alarm

The alarm uses light and sound to give an alert when an intrusion is detected.

The alarm is triggered in the following situations when the alarm is set:

Setting/canceling/stopping the alarm system

â–  Items to check before locking the vehicle

To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following:

â–  Setting

Close the doors and hood, and lock all the doors. The system will be set automatically after 30 seconds.

Except for Canada, the alarm can also be set using the mechanical key.

The security indicator changes from being on to flashing when the system is set.

Theft deterrent system


â–  Canceling or stopping

Do one of the following to deactivate or stop the alarm:

Except for Canada

For Canada

â– System maintenance

The vehicle has a maintenance-free type alarm system.

â– Triggering of the alarm

The alarm may be triggered in the following situations: (Stopping the alarm deactivates the alarm system.)

Theft deterrent system


Theft deterrent system


Theft deterrent system


â– Alarm-operated door lock

In the following cases, depending on the situation, the door may automatically lock to prevent improper entry into the vehicle:

â– Customization (for Canada)

The alarm can be set to deactivate when the key (vehicles without smart key system) or mechanical key (vehicles with smart key system) is used to unlock.

NOTICE

â– To ensure the system operates correctly

Do not modify or remove the system.

If modified or removed, the proper operation of the system cannot be guaranteed.

Engine immobilizer system
The vehicle's keys have built-in transponder chips that prevent the engine from starting if a key has not been previously registered in the vehicle's on-board computer. Never leave the keys inside th ...

Vehicle status information and indicators
...

Other materials:

Stop light switch circuit
Description When the stop light switch is turned on, current flows to the stop lights to illuminate them. Wiring diagram Inspection procedure Inspect fuse (stop) Remove the stop fuse from the instrument panel junction block. Measure the resistance of the fuse. Standard resi ...

Short to b+ in can bus line
Description There may be a short circuit between the can bus line and +b when there is resistance between terminals 6 (canh) and 16 (bat) or terminals 14 (canl) and 16 (bat) of the dlc3. Wiring diagram Inspection procedure Notice: Turn the ignition switch off before measuring ...

Transmitter id
Description The tire pressure warning valve and transmitter that is installed in the tires and wheels measures the air pressure of the tires. The measured values are transmitted to the tire pressure warning receiver on the body as radio waves and then sent to the tire pressure warning ecu ...

© 2011-2024 Copyright www.trav4.net