Toyota RAV4 (XA40) 2013-2018 Owners Manual: Automatic air conditioning system
Air outlets and fan speed are automatically adjusted according to the temperature setting.
- Driver’s side temperature control dial
- Automatic mode button
- Micro dust and pollen filter mode button
- Driver’s side temperature setting display
- Fan speed display
- Air outlet display
- Passenger’s side temperature setting display
- Windshield defogger button
- Simultaneous mode button
- Passenger’s side temperature control dial
- Cooling and dehumidification function on/off button
- Air outlet selector button
- Fan speed control button
- Outside air or recirculated air mode button
- Off button
- Using the automatic air conditioning system
- Adjusting the settings manually
- Defogging the windshield
- Micro dust and pollen filter mode button
- Adjusting the position of and opening and closing the air outlets
Air outlets and air flow
Upper body
Upper body and feet
Feet
Feet and windshield
Switching between outside air and recirculated air modes
Press .
The mode switches between outside air mode (indica ...
Using the automatic air conditioning system
Press .
The dehumidification function begins to operate. Air outlets and fan speed
are automatically adjusted according to the temperature setting and
humidity.
Turn clockwis ...
Other materials:
Throttle / pedal position sensor / switch "A"
Hint:
These dtcs relate to the throttle position (tp) sensor.
Description
The tp sensor is mounted on the throttle body, and detects the opening angle
of the throttle valve. This
sensor is a non-contact type. It uses hall-effect elements in order to yield
accurate signals even in
extrem ...
Fuel system
Precaution
Before working on fuel system
Do not work near an open flame.
Keep gasoline away from rubber and leather parts.
Discharge the fuel pressure before disconnecting
the fuel line to prevent gasoline from spilling out.
Refer to the following procedure.
Discharge fuel ...
Washer motor
Components
Removal
Disconnect cable from negative battery
terminal
Caution:
Wait at least 90 seconds after disconnecting the
cable from the negative (-) battery terminal to
prevent airbag and seat belt pretensioner activation.
Remove washer inlet sub-assembly
Remove th ...
