Toyota RAV4 Service Manual: Camshaft position sensor

Installation

Install camshaft timing oil control valve assembly Apply a light coat of engine oil to the o-ring of the oil control valve. Install the oil control valve with the bolt. Torque: 9 ...

Removal

Disconnect cable from negative battery terminal Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt preten ...

Other materials:

Installation
Install camshaft position sensor Notice: Make sure that the o-ring is not cracked or jammed when installing it. Apply a light coat of engine oil to the o-ring of the sensor. Install the sensor with the bolt. Torque: 9.0 N*m (90 kgf*cm, 80 in.*Lbf) Connect the sensor co ...

Disassembly
Remove radio setting condenser Remove the bolt and condenser. Remove oil pressure switch Using a 24 mm deep socket wrench, remove the sensor. Remove engine coolant temperature sensor Using sst, remove the sensor and gasket. Sst 09817-33190 Remove c ...

Cruise control switch circuit
Description This circuit sends signals to the ecm depending on the cruise control switch condition. The battery supplies positive (+) battery voltage to the cruise control switch. Then terminal ccs of the ecm receives the voltage according to the switch condition. Wiring diagram Inspect ...