Toyota RAV4 Service Manual: Charging generator

On-vehicle inspection

Check battery condition Notice: If the battery is weak or if the engine is difficult to start, perform the following procedures. Check the battery for damage and deformation. If severe d ...

Removal

Disconnect cable from negative battery terminal Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt preten ...

Other materials:

Before refueling the vehicle
Close all the doors and windows, and turn the engine switch to the “lock” position (vehicles without a smart key system) or off (vehicles with a smart key system). Confirm the type of fuel. Fuel types Unleaded gasoline (octane rating 87 [research octane number 91] or higher) Cauti ...

Front door lock
Inspection Inspect front door with motor lock assembly lh Apply the battery voltage to the motor terminals and check the operation of the door lock motor. Ok If the result is not as specified, replace the door lock assembly. Measure the resistance of the door lock position ...

Check mode procedure
Description Check mode has a higher sensitivity to malfunctions and can detect malfunctions that normal mode cannot detect. Check mode can also detect all the malfunctions that normal mode can detect. In check mode, dtcs are detected with 1 trip detection logic. Check mode pro ...