If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary.
Vehicles with a smart key system: turn the engine switch off.
Push the tabs in and lift the cover off.
Under the instrument panel
Remove the cover.
behind the instrument panel
Remove the instrument panel.
Only type a fuse can be removed using the pullout tool.
Type a and b: replace the blown fuse with a new fuse of an appropriate amperage rating.
The amperage rating can be found on the fuse box lid.
Type c and d: contact your toyota dealer.
Fuse layout and amperage ratings
Engine compartment
Under the instrument panel
Behind the instrument panel
After a fuse is replaced
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
Caution
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or injury.
Never replace a fuse with a wire, even as a temporary fix.
Notice
Before replacing fuses
Have the cause of electrical overload determined and repaired by your toyota dealer as soon as possible.
Diagnosis system
Description
The ecm controls the function of cruise control on this
vehicle. Data of the cruise control or dtc can be read
from the dlc3 of the vehicle. When trouble occurs with
cruise control, check that the cruise main indicator
does not come on but dtc inspection is performed.
Theref ...
Evaporator temperatur sensor
Removal
Remove air conditioning unit
Remove the air conditioning radiator (see page ac-
185).
Remove evaporator temperature sensor
(see page ac-193)
Inspection
Inspect evaporator temperature sensor
Measure the resistance of the sensor.
Standard resistance
No ...
Door control switch
Inspection
Inspect power window regulator master
switch assembly (door control switch)
Measure the resistance of the door control switch.
Standard resistance
If the result is not as specified, replace the power
window regulator master switch assembly.
Inspect door control s ...