Make sure the top tether strap is securely latched.
Laws and regulations pertaining to anchorages
The latch system conforms to fmvss225 or cmvss210.2.
Child restraint systems conforming to fmvss213 or cmvss213 specifications can be used.
This vehicle is designed to conform to the sae j1819.
Caution
When installing a booster seat
To prevent the belt from going into alr lock mode, do not fully extend the shoulder belt. Alr mode causes the belt to tighten only. This could cause injury or discomfort to the child.
When installing a child restraint system
If the child restraint system is not correctly fixed in place, the child or other passengers may be seriously injured or even killed in the event of sudden braking, sudden swerving or an accident.
When installing a forward-facing child restraint system on the front passenger seat, move the seat as far back as possible even if the “air bag off” indicator light is illuminated. Failure to do so may result in death or serious injury if the airbags deploy (inflate).
When installing a child restraint system
Caution
Do not use a seat belt extender
If a seat belt extender is used when installing a child restraint system, the seat belt will not securely hold the child restraint system, which could cause death or serious injury to the child or other passengers in the event of a sudden braking, sudden swerving or an accident.
To correctly attach a child restraint system to the anchors
When using the latch anchors, be sure that there are no foreign objects around the anchors and that the seat belt is not caught behind the child restraint system. Make sure the child restraint system is securely attached, or it may cause death or serious injury to the child or other passengers in the event of sudden braking, sudden swerving or an accident.
Unlock warning switch
Inspection
Inspect unlock warning switch assembly
Measure the resistance of the switch.
Standard resistance
If the result is not as specified, replace the switch
assembly.
Ecu power source circuit
Description
This circuit provides power to operate the transponder key ecu.
Wir ...
Data list / active test (2006/01- )
Read data list
Hint:
Using the intelligent tester's data list allows switch,
sensor, actuator and other item values to be read without
removing any parts. Reading the data list early in
troubleshooting is one way to save time.
Connect the intelligent tester (with can vim) to the
...
Problem symptoms table
Hint:
Use the table below to help determine the cause of the
problem symptom. The potential causes of the symptoms
are listed in order of probability in the "suspected area"
column of the table. Check each symptom by checking the
suspected areas in the order they are listed. Re ...