Description
This dtc is output when a communication error occurs between the transponder key amplifier and transponder key ecu. Some possible reasons for the communication error are: 1) 2 or more ignition keys are positioned too close together, or 2) noise is occurring in the communication line.
Wiring diagram
Inspection procedure
Result:
Repeat for all other keys.
Ok: no dtc is output.
Ok: no noise is present (see illustration).
Standard resistance
Ok: engine starts.
End (transponder key amplifier is defective)
Sliding roof control switch circuit
Description
If either the sliding function or tilt function does not operate, there may
be a malfunction in the sliding roof
control switch circuit.
Wiring diagram
Inspection procedure
Perform active test by intelligent tester (sliding roof operation)
Select the active test, use ...
Fuel information
You must only use unleaded gasoline in your vehicle.
Select octane rating 87 (research octane number 91) or higher.
Use of unleaded gasoline with an octane rating lower than 87
may result in engine knocking. Persistent knocking can lead to
engine damage.
At minimum, the gasoline you use sho ...
Precaution
Handling precaution for cruise control system
Turn the cruise control main switch off when not
using the cruise control system.
Be careful as the vehicle speed increases when
driving downhill with the cruise control system on.
The resume/accel operation changes according
to the cr ...