Toyota RAV4 Service Manual: Data list
Hint:
By reading the data list displayed on an intelligent tester, values can be checked, including those of the switches, sensors, and actuators, without removing any parts. Reading the data list as the first step of troubleshooting is one method of shortening diagnostic time.
Notice:
In the table below, the values listed under normal condition are for reference only. Do not depend solely on these values when determining whether or not a part is faulty.
- Warm up the engine.
- Turn the ignition switch off.
- Connect the intelligent tester to the dlc3.
- Turn the ignition switch on.
- Turn the tester on.
- Select the following menu items: diagnosis / enhanced obd ii / data list
- Check the values by referring to the table below.
Hint:
- *1: If no idling conditions are specified, the transmission gear selector lever should be in the n or p position, and the a/c switch and all accessory switches should be off.
- *2: Data list values are only displayed when performing the following active test: vvt b1. For other active tests, the data list value will be 0.
Active test
Hint:
Performing an active test enables components
including the relays, vsv (vacuum switching valve) and
actuators, to be operated without removing any parts.
The active test can be performed w ...
Other materials:
Cup holders
Front
Rear
Pull the armrest down.
Adjusting the size of the cup holder (front passenger’s side)
The adjuster can be removed.
Caution
Items unsuitable for the cup holders
Do not place anything other than cups or aluminum cans in the cup
holders.
Other items may be thrown out ...
Front drive shaft assembly (for 4wd)
Components (2005/11-2006/01)
Components (2006/01- )
...
Precaution
Tire pressure warning system precaution
When the tire pressure warning light turns on,
immediately check the tire pressure of the tire and
adjust it to the specified value. (When the tire
pressure warning light circuit is open, the tire
pressure warning light flashes for 1 minut ...
