Toyota RAV4 Service Manual: Data list / active tes
- Read data list
Hint:
Using the intelligent tester's data list allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the data list early in troubleshooting is one way to save time.
- Connect the intelligent tester (with can vim) to the dlc3.
- Turn the ignition switch on.
- Read the data list according to the display on the tester.
Fail-safe chart
Hint:
If the following conditions are detected while the cruise
control is in operation, the system clears the stored vehicle
speed in the ecm and cancels the cruise control operation.
Hint:
...
Diagnostic trouble code chart
Hint:
If a trouble code is displayed during the dtc check, check
the trouble areas listed for that code in the table below and
proceed to the appropriate page.
...
Other materials:
Brake master cylinder
Components
On-vehicle inspection
Check brake fluid level warning switch
Remove the reservoir filler cap and strainer.
Disconnect the brake fluid level warning switch
connector.
Measure the resistance of the switch.
Hint:
There is a float inside the reservoir. Its positio ...
Trailer towing
Your vehicle is designed primarily as a passenger-and-load-carrying
vehicle. Towing a trailer can have an adverse impact on
handling, performance, braking, durability, and fuel consumption.
For your safety and the safety of others, you must not overload
your vehicle or trailer. You must also e ...
Diagnostic trouble code chart
Look for output diagnostic trouble codes (dtcs) (from the
dtc checks) in the appropriate section's diagnostic trouble
code chart. Use the chart to determine the trouble area and
the proper inspection procedure. A description of each of the
chart's columns are below.
Item
Description
...
