Toyota RAV4 manuals

Toyota RAV4 Service Manual: Data list / active test

  1. Read data list

Hint:

Using the intelligent tester's data list allows switch, sensor, actuator and other item values to be read without out removing any parts. Reading the data list early in troubleshooting is one way to save time.

  1. Connect the intelligent tester (with can vim) to the dlc3.
  2. Turn the ignition switch on.
  3. Turn the intelligent tester on.
  4. Read the data list according to the display on the tester.

Toyota RAV4. Data list / active test


Toyota RAV4. Data list / active test


Toyota RAV4. Data list / active test


Toyota RAV4. Data list / active test


Hint:

  1. Parform active test

Hint:

Performing the intelligent tester's active test allows relay, vsv, actuator and other items to be operated without removing any parts. Performing the active test early in troubleshooting is one way to save time.

The data list can be displayed during the active test.

  1. Connect the intelligent tester (with can vim) to the dlc3.
  2. Turn the ignition switch on.
  3. Turn the intelligent tester on.
  4. Perform the active test according to the display on the tester.

Hint:

Toyota RAV4. Parform active test


Toyota RAV4. Parform active test


Hint:

*1: W/ downhill assist control

*2: For 2wd (w/ auto lsd)

Fail-safe chart
Fail safe operation If there is a problem with any sensor signals or actuator systems, the skid control ecu prohibits the power supply to the abs and traction actuator and informs the e ...

Diagnostic trouble code chart
Hint: If no abnormality is found when inspecting parts, check the skid control ecu and check for poor contact at the ground points. If a dtc is displayed during the dtc check, check the ci ...

Other materials:

Towing related terms
Gcwr (gross combination weight rating) The maximum allowable gross combination weight. The gross combination weight is the sum of the total vehicle weight (including the occupants, cargo and any optional equipment installed on the vehicle) and the weight of the trailer being towed (inc ...

Inspection
Inspect cylinder head for warpage Using a precision straightedge and feeler gauge, measure the warpage of the contact surfaces of the cylinder block and manifolds. Maximum warpage: 0.08 Mm (0.0032 In.) If the warpage is greater than the maximum, replace the cylinder head sub-a ...

Parts location
System diagram Hint: The abs and traction actuator (skid control ecu) detects and stores steering sensor and yaw rate sensor dtcs and performs dtc communication by receiving information from the steering sensor and yaw rate sensor. The ecm uses the can communication sy ...

В© 2011-2024 Copyright www.trav4.net