Toyota RAV4 manuals

Toyota RAV4 Service Manual: Data list / active test (2005/11-2006/01)

  1. Read data list

Toyota RAV4. Read data list


  1. Read data list

Hint:

Using the intelligent tester's data list allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the data list early in troubleshooting is one way to save time.

  1. Connect the intelligent tester (with can vim) to the dlc3.
  2. Turn the ignition switch on and turn the intelligent tester on.
  3. Read the data list by following the prompts on the tester.

Toyota RAV4. Read data list


Toyota RAV4. Read data list


  1. Perform active test

Hint:

Performing the intelligent tester's active test allows relay, vsv, actuator and other items to be operated without removing any parts. Performing the active test early in troubleshooting is one way to save time.

The data list can be displayed in the active test.

  1. Connect the intelligent tester (with can vim) to the dlc3.
  2. Turn the ignition switch on and turn the intelligent tester on.
  3. Perform the active test by following the prompts on the tester.

Toyota RAV4. Perform active test


Check mode procedure
Panel diagnosis (indicator check) Turn the ignition switch to lock. Turn the ignition switch on while simultaneously pressing the a/c control auto switch and the rec/ frs switch. Chec ...

Data list / active test (2006/01- )
Read data list Hint: Using the intelligent tester's data list allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the data list early in ...

Other materials:

Underdrive clutch
Components Disassembly Inspect pack clearance of underdrive clutch (see page ax-247) Remove no. 1 Underdrive clutch disc Using a screwdriver, pry out the underdrive clutch flange snap ring. Remove the flange, 3 discs and 3 plates from the underdrive clutch drum. In ...

Removal
Remove radiator support opening cover Remove front wheel rh Remove front fender apron rh Remove front suspension member reinforcement rh Remove the 4 bolts and reinforcement rh. Remove fan and generator v belt Using sst and 19 mm socket wrench, loosen the vribbed belt ...

Adjusting the mirrors
Make sure that you can see backward clearly by adjusting the inside and outside rear view mirrors properly. Caution Observe the following precautions. Failure to do so may result in death or serious injury. Do not adjust the position of the driver’s seat while driving. Doing so could ...

© 2011-2024 Copyright www.trav4.net