Toyota RAV4 Service Manual: Door lock
- Power door lock control system
- Parts location
- System description
- How to proceed with troubleshooting
- Operation check
- Customize parameters
- Problem symptoms table
- Terminals of ecu
- Diagnosis system
- Data list / active test
- Key reminder warning system
- System description
- How to proceed with troubleshooting
- Operation check
- Problem symptoms table
- Terminals of ecu
- Diagnosis system
- Data list / active test
- Door control transmitter module
- Door control switch
- Front door lock
- Back door lock
- Door control receiver
Installation
Install rear differential support
Install the differential support to the differential
carrier with the 4 bolts.
Torque: 98 n*m (999 kgf*cm, 72 ft.*Lbf)
Install rear differential ...
Other materials:
Removal (2006/01- )
Disconnect cable from negative battery
terminal
Caution:
Wait at least 90 seconds after disconnecting the
cable from the negative (-) battery terminal to
prevent airbag and seat belt pretensioner activation.
Remove front door scuff plate lh
Using a screwdriver, detach the 10 cla ...
Vsc warning light remains on
Description
The skid control ecu is connected to the combination meter via the can
communication system.
W/o multi information display:
if the skid control ecu stores any dtcs which relate to the vsc system, the vsc
warning light comes on
in the combination meter.
W/ multi information d ...
Center airbag sensor assembly malfunction
Description
The center airbag sensor consists of the airbag sensor, the safing sensor,
the drive circuit, the diagnosis
circuit and the ignition control.
If the center airbag sensor receives signals from the airbag sensor, it
determines whether or not the srs
should be activated.
Dt ...
