Toyota RAV4 Service Manual: ECM

Circuit opening relay

On-vehicle inspection Disconnect cable from negative battery terminal Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airb ...

Removal

Disconnect cable from negative battery terminal Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt preten ...

Other materials:

Transmission range sensor circuit malfunction (prndl input)
Description The park/neutral position (pnp) switch detects the shift lever position and sends signals to the ecm. Monitor description These dtcs indicate a problem with the park/neutral position switch and the wire harness in the park/ neutral position switch circuit. The park/neu ...

Installation
Install water pump assembly Remove any old seal packing material from the contact surface. Apply a continuous line of seal packing as shown in the illustration. Seal packing: toyota genuine seal parking black, three bond 1207b or equivalent Standard seal diameter: 2.2 To 2. ...

Diagnosis system
Description Data of the system can be read through the data link connector 3 (dlc3) of the vehicle. Therefore, when the system seems to be malfunctioning, use the intelligent tester to check for a malfunction and repair it. Check dlc3 The vehicle's ecm uses iso 157 ...