This function minimizes the loss of the ect functions when a malfunction occurs in a sensor or solenoid.
This stops lock-up control, then fuel economy decreases.
Manual shifting as shown in the following table must be done. In case of a short circuit, the ecm stops sending the current to the short circuited solenoid.
Even if starting the engine in the fail-safe mode, the gear position remains in the same position.
Hint:
Terminals of ecu
Check tire pressure warning ecu
Disconnect the e56 ecu connector.
Measure the voltage and resistance of the wire
harness side connector.
If the result is not as specified, there may be a
malfunction on the wire harness side.
Reconnect the e56 ecu connector.
Measure the ...
Test mode procedure
Test mode check
Hint:
When entering the test mode, the tire pressure
warning ecu sets all the test dtcs first. After
completing the test mode for each inspection item, the
dtcs that are determined normal by the tire pressure
warning ecu will be erased.
The dtcs for other inspec ...
Components
...