Toyota RAV4 manuals

Toyota RAV4 Service Manual: Floor shift assembly

Components

Toyota RAV4. Floor shift assembly


Toyota RAV4. Floor shift assembly


Removal

  1. Disconnect cable from negative battery terminal

Caution:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  1. Remove shift lever knob sub-assembly

  2. Remove rear console box sub-assembly

  1. Remove the console box (see page ip-20).
  1. Disconnect transaxle control cable assembly

Toyota RAV4. Disconnect transaxle control cable assembly


  1. disconnect the control cable from the shift lever.

Toyota RAV4. Disconnect transaxle control cable assembly


  1. Turn the nut and disconnect the control cable from the shift lever retainer.
  1. Remove floor shift assembly

Toyota RAV4. Remove floor shift assembly


  1. Remove the 4 bolts and floor shift.

Toyota RAV4. Remove floor shift assembly


  1. Disconnect the 2 connectors and detach the clamp.

Disassembly

  1. Remove lower position indicator housing

Toyota RAV4. Remove lower position indicator housing


  1. Detach the 4 claws and remove the housing.
  2. Remove the position indicator slide cover with slide no. 2 Cover.
  1. Remove position indicator light housing

Toyota RAV4. Remove position indicator light housing


  1. Detach the 2 claws and remove the indicator light housing from the floor shift position indicator housing.
  1. Remove indicator light wire sub-assembly

  2. Remove shift lock release button

Toyota RAV4. Remove shift lock release button


  1. Detach the 2 claws and remove the button and spring from the position indicator light housing.

Adjustment

  1. Inspect shift lever position

  1. When shifting the lever from p to the r position with the ignition switch on and the brake pedal depressed, make sure that the shift lever moves smoothly and moves correctly into position.
  2. Start the engine and make sure that the vehicle moves forward when shifting the lever from n to the d position and moves rearward when shifting the lever to the r position.

    If the operation cannot be performed as specified, inspect the park/neutral position switch assembly and check the shift lever assembly installation condition.

  1. Adjust shift lever position

  1. Shift the shift lever to the n position.
  2. Slide the adjuster case cover in the direction shown in the illustration and pull out the lock piece.
  3. Gently pull the cable rod toward the rear of the vehicle by hand to pull the cable taut.

Toyota RAV4. Adjust shift lever position


  1. Press the lock piece into the adjuster case and lock it.

Toyota RAV4. Adjust shift lever position


Toyota RAV4. Adjust shift lever position


  1. Slide the cover in the direction shown in the illustration.

Notice:

Slide the cover past the protrusion of the lock piece.

  1. Inspect the operation after the adjustment.

Reassembly

  1. Install shift lock release button

  1. Install the spring and button and attach the claws to the position indicator light housing.
  1. Install indicator light wire sub-assembly

Toyota RAV4. Install indicator light wire sub-assembly


  1. Install position indicator light housing

Toyota RAV4. Install position indicator light housing


  1. Attach the indicator light housing to the shift position indicator housing with the 2 claws.
  1. Install lower position indicator housing

Toyota RAV4. Install lower position indicator housing


  1. Install the position indicator slide cover with slide cover no. 2 To the indicator housing.
  2. Attach the housing to the floor shift assembly with the 4 claws.

Installation

  1. Install floor shift assembly

Toyota RAV4. Install floor shift assembly


  1. Connect the 2 connectors and attach the clamp.
  2. Install the floor shift with the 4 bolts.
  1. Connect transaxle control cable assembly

Toyota RAV4. Connect transaxle control cable assembly


  1. turn the nut of the control cable and push in the lock.

Toyota RAV4. Connect transaxle control cable assembly


  1. Install the control cable onto the shift lever retainer.

Notice:

Install the cable with the protruding portion of the cable outer facing upward.

Toyota RAV4. Connect transaxle control cable assembly


Toyota RAV4. Connect transaxle control cable assembly


  1. Connect the control cable to the shift lever.

Notice:

Connect the control cable so that the adjusting mechanism lock of the control cable is installed on the driver side of the vehicle.

  1. Connect cable to negative battery terminal

  2. Inspect shift lever position (see page ax-138)

  3. Adjust shift lever position (see page ax-138)

  4. Install rear console box sub-assembly

  1. Install the rear console box (see page ip-26).
  1. Install shift lever knob sub-assembly

Transmission control cable assembly
Replacement Remove rear console box sub-assembly Remove the console box (see page ip-20). Disconnect cable from negative battery terminal Caution: Wait at least 90 seconds after ...

Differential oil seal
Components Replacement Replace transaxle housing oil seal lh Drain the automatic transaxle fluid. Remove the drain plug and gasket, and drain atf. Install a new gasket and ...

Other materials:

Front passenger occupant classification system
Your vehicle is equipped with a front passenger occupant classification system. This system detects the conditions of the front passenger seat and activates or deactivates the devices for the front passenger. Seat belt reminder light Srs warning light “Air bag off” indicator light ...

Connecting a bluetooth® device
Up to 5 bluetooth® devices (phones (hfp) and audio players (avp)) can be registered. If more than 1 bluetooth® device has been registered, select which device to connect to. Press the “setup” button. Select “bluetooth*”. *: Bluetooth is a registered trademark of bluetooth sig ...

Seat heater system
Parts location System diagram Problem symptoms table Hint: Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "suspected area" column of the table. Check each symptom by check ...

© 2011-2024 Copyright www.trav4.net