Toyota RAV4 Service Manual: Front seat frame with adjuster
Inspection
- Inspect front seat frame with adjuster
- Check operation of the seat frame (slide motor).
- Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.
Ok 
If the result is not as specified, replace the seat frame with adjuster.
- Check operation of the seat frame (front vertical motor).
- Check if the seat frame moves smoothly when the battery is connected to the front vertical motor connector terminals.
Ok 
If the result is not as specified, replace the seat frame with adjuster.
- Check operation of the seat frame (lifter motor).
- Check if the seat frame moves smoothly when the battery is connected to the lifter motor connector terminals.
Ok 
If the result is not as specified, replace the seat frame with adjuster.
- Check operation of the seat frame (reclining motor).
- Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.
Ok 
If the result is not as specified, replace the seat frame with adjuster.
Power seat switch
Inspection
Inspect front power seat switch
Measure the resistance between the terminals when
each switch is operated.
Standard resistance
Slide switch
Front vertical switch
Lif ...
Front power seat lumbar switch
Inspection
Inspect front power seat lumbar switch lh
Measure the resistance between the terminals when
the switch is operated.
Standard resistance
If the result is not as specified ...
Other materials:
Fuel pump control circuit
Description
When the engine is cranked, the starter relay drive signal output from the
star terminal of the ecm is
input into the sta terminal of the ecm, and ne signal generated by the
crankshaft position sensor is also
input into the ne+ terminal. Thus, the ecm interprets that the engine is ...
Back door
The back door can be locked/unlocked and opened/closed by
the following procedures.
Locking and unlocking the back door
Door lock switch
Entry function (if equipped)
Wireless remote control
Opening/closing the back door from inside the vehicle (vehicles
with a power back door)
Press a ...
Vacuum switching valve
Components
Removal
Disconnect cable from negative battery
terminal
Caution:
Wait at least 90 seconds after disconnecting the
cable from the negative (-) battery terminal to
prevent airbag and seat belt pretensioner activation.
Remove purge vsv
Disconnect the purge vsv ...
