The fuel consumption information can be displayed on entune premium audio with navigation and entune audio screen.
Display the trip information or past record screen
Press the “car” button.
Press the “apps” button, and then select “eco” on the screen.
Fuel consumption
Trip information
If the “trip information” screen does not appear, select “trip information”.
Average fuel consumption for the past 15 minutes is divided by color into past averages and averages attained since the engine switch was last turned to the “on” position (vehicles without a smart key system) or ignition on mode (vehicles with a smart key system). Use the displayed average fuel consumption as a reference.
These images are examples only, and may vary slightly from actual conditions.
Past record
If the “past record” screen does not appear, select “past record”.
These images are examples only, and may vary slightly from actual conditions.
Resetting the data
Selecting “clear” on the “trip information” screen will reset the trip information data.
Selecting “clear” on the “past record” screen will reset the past record data.
Updating the past record data
Selecting “update” on the “past record” screen will update the past record data.
Also, the average fuel consumption displayed in the multi-information display will be reset at the same time.
Cruising range
Displays the estimated maximum distance that can be driven with the quantity of fuel remaining.
This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
Ignition coil
Components
Removal
Disconnect cable from negative battery terminal
Caution:
Wait at least 90 seconds after disconnecting the
cable from the negative (-) battery terminal to
prevent airbag and seat belt pretensioner activation.
Remove no. 1 Engine cover (see page es-410)
Remove i ...
Disassembly
Inspect oil pump assembly (see page ax-218)
Remove clutch drum oil seal ring
Remove the 2 clutch drum oil seal rings.
Remove stator shaft assembly
Using a t30 ''torx'' socket, remove the 11 bolts and
stator shaft. Keep the gears in assembling order.
Inspect clearan ...
Correct use of the seat
belts
Extend the shoulder belt so
that it comes fully over the
shoulder, but does not come
into contact with the neck or
slide off the shoulder.
Position the lap belt as low as
possible over the hips.
Adjust the position of the
seatback.
Sit up straight and well back
in the seat.
Do not twis ...