Toyota RAV4 Service Manual: General maintenance (2005/11-2006/01)
- Inspect drive belt (see page em-6)
- Replace spark plugs (see page ig-7)
- Replace air cleaner filter
- Remove the air filter.
- Visually check that the air filter is not excessively damaged or oily.
- Replace the air filter with a new one, if necessary.
- Replace engine oil and oil filter (see page lu-1)
- Replace engine coolant (see page co-1)
- Inspect gasket in fuel tank cap (see page ec-25)
- Inspect fuel lines and connections, fuel tank vapor vent system hoses
- Visually check the fuel lines for cracks, leakage, loose connections, deformation.
- Inspect exhaust pipes and mountings
- Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.
- Inspect valve clearance (see page em-8)
Engine
...
General maintenance (2006/01- )
Inspect drive belt (see page em-7)
Replace spark plugs (see page ig-7)
Replace air cleaner filter
Remove the air filter.
Visually check that the air filter is not excessively
damaged ...
Other materials:
Vc output circuit
Description
The ecm constantly generates 5 v power from the battery voltages supplied to
the +b (batt) terminal to
operate the microprocessor. The ecm also provides this power to the sensors
through the vc output
circuit.
When the vc circuit is short-circuited, the microprocessor in the ...
System description
Engine immobiliser system description
The engine immobiliser system is designed to prevent
the vehicle from being stolen. This system uses a
transponder key ecu that stores the key codes of
authorized ignition keys. If an attempt is made to start
the engine using an unauthorized key, the e ...
Dtc check / clear
Check dtc (using intelligent tester)
Connect the intelligent tester (with can vim) to the
dlc3.
Turn the ignition switch on.
Read the dtcs by following the directions on the
tester screen.
Hint:
Refer to the intelligent tester operator's manual for
further details.
Chec ...
