Notice:
Be careful not to damage the oil seal lip.
Standard body clearance: 0.10 To 0.17 Mm (0.0039 To 0.0067 In.)
Maximum body clearance: 0.17 Mm (0.0067 In.)
If the body clearance is greater than the maximum, replace the oil pump body sub-assembly.
Standard tip clearance: 0.07 To 0.15 Mm (0.0028 To 0.0059 In.)
Maximum tip clearance: 0.15 Mm (0.0059 In.)
If the tip clearance is grater than the maximum, replace the oil pump body sub-assembly.
Standard side clearance: 0.02 To 0.05 Mm (0.0008 To 0.0020 In.)
Maximum side clearance: 0.05 Mm (0.0020 In.)
Standard drive gear thickness
Standard driven gear thickness
Standard inside diameter: 38.113 To 38.138 Mm (1.50051 To 1.50149 In.)
Maximum inside diameter: 38.188 Mm (1.50346 In.)
If the inside diameter is grater than maximum, replace the oil pump body sub-assembly.
Standard inside diameter: 21.500 To 21.526 Mm (0.84646 To 0.84748 In.)
Maximum inside diameter: 21.57 Mm (0.8492 In.)
If the indicator diameter is greater than the maximum, replace the stator shaft.
Passenger airbag on / off indicator circuit malfunction
Description
The passenger airbag on / off indicator circuit consists of the center airbag
sensor and the heater
control panel*1 or *2.
This circuit indicates the operation condition of the front passenger airbag,
the front passenger side airbag
and passenger side seat belt pretensioner ...
Throttle / pedal position sensor / switch "d" circuit range / performance
Description
Hint:
Refer to dtc p2120 (see page es-282).
Monitor description
When the difference between the output voltages of vpa and vpa2 deviates from
the standard, the ecm
determines that the accelerator pedal position (app) sensor is malfunctioning.
The ecm turns on the mil
and th ...
Compressor and pulley (for 2az-fe)
Components
Removal
Discharge refrigerant from
refrigeration system (see page ac-172)
Disconnect cable from negative battery
terminal
Caution:
Wait at least 90 seconds after disconnecting the
cable from the negative (-) battery terminal to
prevent airbag and seat belt pretensione ...