Toyota RAV4 Service Manual: Installation
Hint:
- Use the same procedures for the rh side and lh side.
- The procedures listed below are for the lh side.
- Install front pillar cover sub-assembly upper lh
- Attach the 3 clips to install the pillar cover.
Removal
Hint:
Use the same procedures for the rh side and lh side.
The procedures listed below are for the lh side.
Remove front pillar cover sub-assembly upper lh
Using a moulding remover, ...
Roof drip side finish moulding
Components
...
Other materials:
Pressure sensor circuit
Description
This dtc is output when the refrigerant pressure is either extremely low
(0.19 Mpa [2.0 Kgf/cm2, 28 psi]
or less) or extremely high (3.14 Mpa [32.0 Kgf/cm2, 455 psi] or more). The air
conditioning pressure
sensor, which is installed on the pipe of the high pressure side, detec ...
Inspection
Inspect water pump assembly
Visually check the drain hole for coolant leakage.
If leakage is found, replace the water pump
assembly.
Turn the pulley, and then check that the water pump
bearing moves smoothly without making a "click"
noise.
If it does not move s ...
Motor rotation angle sensor malfunction
Description
The motor rotation angle sensor detects the motor rotation angle and sends
this information to the power
steering ecu.
Wiring diagram
Inspection procedure
Check connector connection condition
Check the installation condition of the motor rotation
angle senso ...
