Toyota RAV4 Service Manual: Installation
- Install camshaft timing oil control valve assembly
- Apply a light coat of engine oil to the o-ring of the oil control valve.
- Install the oil control valve with the bolt.
Torque: 9.0 N*m (92 kgf*cm, 80 in.*Lbf)
Notice:
Make sure that the o-ring is not cracked or jammed.
- Connect the oil control valve connector.
- Connect cable to negative battery terminal
- Check for engine oil leaks
- Start the engine, and check that there are no oil leaks.
- Install no. 1 Engine cover (see page es-414)
Inspection
Inspect camshaft timing oil control valve
assembly
Measure the resistance of the oil control valve.
Standard resistance
If the result is not as specified, replace the oil control
valv ...
Camshaft position sensor
Components
...
Other materials:
Using the radio
Power
Volume
Adjusting the frequency
Scanning for receivable stations
Am/fm mode button
Station selectors
Seeking the frequency
Displaying text message
Setting station presets
Search for the desired stations by turning the ¢Â§tune¢escroll¢¸
knob or ...
Diagnosis system
Description
Sliding roof system data and diagnostic trouble
codes (dtcs) can be read through the vehicle's
data link connector 3 (dlc3). When the system
seems to be malfunctioning, use the intelligent
tester to check for malfunctions and perform repairs.
Check dlc3
The vehi ...
Transmitter id not registered in main mode
Description
Inspection procedure
Notice:
It is necessary to register an id code after replacing the tire pressure
warning valve and
transmitter and/or the tire pressure monitor ecu (see page tw-9).
Hint:
Set the tire pressure to the specified value.
Standard pressure:
220 kpa (2.2 ...
