Toyota RAV4 manuals

Toyota RAV4 Owners Manual: Making a phone call

To enter the “phone” mode, press the off-hook switch.

Making a phone call

Receiving a phone call

Operations during a call

Adjusting the ring tone volume when receiving a call

Dialing by selecting a name

  1. Select “phonebook” using the “tune•scroll” knob.
  2. Select the desired name using the knob and press the off-hook switch.

By pressing
 (add s. Dial) and one of the speed dial buttons (from [1]
to [5])
while the desired name is selected, it can be registered as a speed dial.

Press  (a-z)
to display the registered names in alphabetical order of the initial.

Speed dialing

  1. Select “speed dials” using the “tune•scroll” knob.
  2. Press the desired preset button (from  [1] to
    [5]) and
    press the off-hook switch.

To delete a registered speed dial, after selecting the desired preset button (from
[1] to  [5])
press  (delete)
and then press (yes).


To overwrite a speed dial, after selecting the desired preset button (from  [1]
to [5])
press  (yes).


Dialing by entering the number

  1. Select “dial by number” using the “tune•scroll” knob.
  2. Enter the phone number and press the off-hook switch.

Dialing from call histories

  1. Select “all calls”, “missed calls”, “incoming calls” or “outgoing calls” using the “tune•scroll” knob.
  2. Select a desired number using the knob and press the off-hook switch.

The following operations can be performed:

Press  (add
s. Dial) and then press the desired preset button (from  [1]
to  [5]).


Press
(delete) and press
 (yes).

When receiving a phone call

Answering the phone

Press the off-hook switch.

Refusing the call

Press the on-hook switch.

Receiving a call when on another call

Press the off-hook switch.

Pressing the off-hook switch again returns you to the previous call.

Operations during a call

Transferring a call

A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the following methods:

  1. Operate the cellular phone.

    Refer to the manual that comes with the cellular phone for the operation of the phone.

  2. Press the (hndset).*

*: This operation can be performed only when transferring a call from the cellular phone to the system during a call.

Press
(mute).

Press  (0-9)
and use the “tune•scroll” knob to input the desired digits.

To decrease the volume: turn the “pwr•vol” knob counterclockwise.

To increase the volume: turn the “pwr•vol” knob clockwise.

Adjusting the ring tone volume when receiving a call

To decrease the volume: turn the “pwr•vol” knob counterclockwise.

To increase the volume: turn the “pwr•vol” knob clockwise.

When talking on the phone

Automatic volume adjustment

When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less.

Phone call system functions

Depending on the cellular phone, certain functions may not be available.

Situations where the system may not recognize your voice

Operating a bluetooth® enabled portable player
Power Volume Search playback Next commands, random play or back button Repeat play Fast-forwarding, rewinding or selecting an album Changing the audio source/ playback Playb ...

Using the “setup” menu (“bluetooth*” menu)
Registering a bluetooth® device in the system allows the system to function. The following functions can be used for registered devices: Functions and operation procedures Press the “setup ...

Other materials:

Sliding roof control switch circuit
Description If either the sliding function or tilt function does not operate, there may be a malfunction in the sliding roof control switch circuit. Wiring diagram Inspection procedure Perform active test by intelligent tester (sliding roof operation) Select the active test, use ...

Removal (2005/11-2006/01)
Disconnect cable from negative battery terminal Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation. Remove front door scuff plate lh Using a screwdriver, detach the 10 cla ...

Inspection
Inspect generator brush holder assembly Using a vernier caliper, measure the brush length. Standard length: 9.5 To 11.5 Mm (0.374 To 0.453 In.) Minimum length: 4.5 Mm (0.177 In.) If the brush length is less than the minimum, replace the generator brush holder assembly. Inspe ...

© 2011-2024 Copyright www.trav4.net