Toyota RAV4 Service Manual: Motor rotation angle sensor malfunction
Description
The motor rotation angle sensor detects the motor rotation angle and sends this information to the power steering ecu.
Wiring diagram
Inspection procedure
- Check connector connection condition
- Check the installation condition of the motor rotation angle sensor connector.
Ok: motor rotation angle sensor connector is securely connected to the power steering ecu.
Result 
- reconfirm dtc
- Reinstall motor rotation angle sensor connector.
- Check for dtc.
Ok: dtc is not output.
Result 
- Read value of intelligent tester (motor rotation angle sensor)
- Connect the intelligent tester (with can vim) to the dlc3.
- Turn the ignition switch on and press the intelligent tester main switch on.
- Select the items "motor rotate" in the data list
and read the value displayed on the intelligent tester.
Ok: during steering operation, motor rotation angle value changes from 0 to 360м/b>
Replace power steering ecu
Motor terminal voltage malfunction
Description
The power steering ecu supplies the current to the power steering motor
through the motor circuit.
Wiring diagram
Inspection procedure
Read value of intelligent tester ( ...
Ecu malfunction
Description
Inspection procedure
If the power steering ecu detects these dtcs, it will shut off the motor
relay circuit (built into the power
steering ecu) and stop power assist. However, pow ...
Other materials:
Brake pedal load sensing switch
On-vehicle inspection
Inspect brake pedal load sensing switch
Hint:
Do not remove the brake pedal load sensing switch
from the brake pedal support.
When there is a malfunction in the brake pedal load
sensing switch, replace the brake pedal support.
Disconnect the brake pedal l ...
Engine control system malfunction
Description
If a malfunction in the engine control system is detected, the operations of
vsc and trc are prohibited
by the fail-safe function. When the signals from the engine are input normally,
the fail-safe is canceled and
the dtc is not stored.
Inspection procedure
Check harn ...
Customize parameters
Notice:
When the customer requests a change in a function,
first make sure that the function can be customized.
Make a note of the current settings before
customizing.
When troubleshooting a function, first make sure that
the function is set to the default setting.
Combination me ...
