Toyota RAV4 Service Manual: Motor terminal voltage malfunction
Description
The power steering ecu supplies the current to the power steering motor
through the motor circuit.
Wiring diagram
Inspection procedure
- Read value of intelligent tester (motor voltage)
- Connect the intelligent tester (with can vim) to the dlc3.
- Turn the ignition switch on and press the intelligent tester main switch on.
- Select the items "mtr terminal(u)", "mtr terminal(v)", "mtr terminal(w)" in the data list and read the value displayed on the intelligent tester.
Result
Replace power steering ecu
Short in motor circuit
Description
The power steering ecu supplies current to the power steering motor through
this circuit.
Inspection procedure
Reconfirm dtc
Check for dtc.
Ok:
dtc is not output.
...
Motor rotation angle sensor malfunction
Description
The motor rotation angle sensor detects the motor rotation angle and sends
this information to the power
steering ecu.
Wiring diagram
Inspection procedure
Check conne ...
Other materials:
Front drive shaft assembly (for 4wd)
Components (2005/11-2006/01)
Components (2006/01- )
...
Brk relay
On-vehicle inspection
Inspect brk relay
Remove the brk relay from the engine room no. 1
Relay block.
Measure the resistance of the relay.
Standard resistance
If the result is not as specified, replace the relay. ...
Battery current sensor circuit
Description
The battery current sensor installed on the positive (+) battery terminal
detects the amount of current
supplied from the generator.
The battery current sensor changes current to voltage (at the positive (+)
battery terminal) and sends it to
the ecm. The ecm controls th ...
