Display contents
The multi-information display presents the driver with a variety of driving- related data including the current outside air temperature.
Outside temperature display
Indicates the outside temperature.
The temperature range that can be displayed is from -40„af (-40„ac) to 122„af (50„ac).
Engine coolant temperature gauge
Displays the engine coolant temperature.
Shift position and shift range
Displays the selected shift position or selected shift range
Trip information
Displays odometer, trip meter, driving range, fuel consumption and other cruising related information.
Trip information
Switching the display
Items displayed can be switched by pressing the “disp” button.
Odometer
Displays the total distance the
vehicle has
been driven.
Trip meters “a” and “b”
Displays the distance the vehicle
has been
driven since the meter was last reset. Trip
meters “a” and “b” can be used to record and
display different distances independently.
Pressing and holding the “disp” button will reset the trip meter that is currently displayed.
Current fuel consumption
Displays the current rate of fuel
consumption.
Average fuel consumption
Displays the average fuel
consumption since
the function was reset.
Average vehicle speed
Displays the average vehicle speed
since the
engine was last started.
Driving range
Displays the estimated approximate
distance
that can be driven with the quantity of fuel
remaining.
When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.
Eco driving indicator light customization
Eco driving indicator light can be activated or deactivated.
When disconnecting and reconnecting battery terminals
The following information data will be reset:
Outside temperature display
In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change.
When is displayed
The system may be malfunctioning. Take your vehicle to your toyota dealer.
Customization
Settings can be changed. (Customizable features: „_p. 687)
Notice
The multi-information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed.
Pressure control solenoid "B" performance (shift solenoid valve sl2)
Description
The ecm uses signals from the output shaft speed sensor and input speed
sensor to detect the actual
gear position (1st, 2nd, 3rd or o/d gear).
Then the ecm compares the actual gear with the shift schedule in the ecm memory
to detect mechanical
problems of the shift solenoid ...
How to proceed with troubleshooting
Hint:
Use these procedures to troubleshoot the seat belt
warning system.
*: Use the intelligent tester.
Vehicle brought to workshop
Inspect battery voltage
Standard voltage:
11 to 14 v
If the voltage is below 11 v, recharge or replace the battery
before proceeding.
...
Light bulbs
You may replace the following bulbs by yourself. The difficulty
level of replacement varies depending on the bulb. If necessary
bulb replacement seems difficult to perform, contact your
toyota dealer.
For more information about replacing other light bulbs, contact
your toyota dealer.
Prepari ...