Toyota RAV4 Service Manual: Oil pump

Reassembly

Bearing position Standard bearing position Install differential gear lube apply tube Install the apply tube and clamp to the transaxle housing with the bolt. Torque: ...

Disassembly

Inspect oil pump assembly (see page ax-218) Remove clutch drum oil seal ring Remove the 2 clutch drum oil seal rings. Remove stator shaft assembly Using a t30 ''torx'' socke ...

Other materials:

Reassembly
V Attach the 7 outside moulding retainers to install the extension. Install front bumper extension rh (for wide body) Hint: Use the same procedures described for the lh side. Install front bumper hole cover lh (w/o fog light) Install the bumper hole cover with ...

Inspection
Inspect no. 1 Chain tensioner Check that the plunger moves smoothly when the ratchet pawl is raised with your finger. Release the ratchet pawl, then check that the plunger is locked in place by the ratchet pawl and does not move when pushed with your finger. Inspect chain ...

Installation
Install rear differential support Install the differential support to the differential carrier with the 4 bolts. Torque: 98 n*m (999 kgf*cm, 72 ft.*Lbf) Install rear differential no. 1 And no. 2 Support Install the differential no. 1 And no. 2 Supports with the 4 bo ...