Toyota RAV4 Service Manual: Outside moulding

Installation

Hint: Use the same procedures for the rh side and lh side. The procedures listed below are for the lh side. When replacing the clip, heat the clip and body using a heat light. Standard he ...

Removal

Hint: Use the same procedures for the rh side and lh side. The procedures listed below are for the lh side. When removing the moulding, heat the vehicle body and moulding using a heat light. ...

Other materials:

Problem symptoms table
When a "normal" code is output during a dtc check but the problem is still occurring, use the problem symptoms table. The suspected areas (circuits or parts) for each problem symptom are in the table. The suspected areas are listed in order of probability. A description of each of the ...

Gcwr, twr and unbraked twr
Confirm that the gross trailer weight, gross combination weight, gross vehicle weight, gross axle weight and tongue weight are all within the limits. Gcwr* 2Wd models: 5985 lb. (2715 Kg) Awd models: 6100 lb. (2765 Kg) Twr* 1500 Lb. (680 Kg) Unbraked twr* 1000 Lb. (450 Kg) *: ...

Cooling fan relay
On-vehicle inspection Disconnect cable from negative battery terminal Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation. Remove engine room no. 2 Relay block cover Inspect ...